Author Topic: GE 2800 dishwasher dispenser lid broken  (Read 2978 times)

Offline Jim214

  • VIP Member
  • Member Since: Aug 2011
  • Posts: 13
GE 2800 dishwasher dispenser lid broken
« on: September 25, 2011, 10:27:45 AM »
My lid dispenser just  broke off in my hand...is this a replaceable part?  How do I do it?
Thanks

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 474
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: GE 2800 dishwasher dispenser lid broken
« Reply #1 on: September 25, 2011, 11:50:37 AM »
Could you post the model number.

Offline Jim214

  • VIP Member
  • Member Since: Aug 2011
  • Posts: 13
Re: GE 2800 dishwasher dispenser lid broken
« Reply #2 on: September 25, 2011, 12:26:39 PM »
Gsd2800003

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 474
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: GE 2800 dishwasher dispenser lid broken
« Reply #3 on: September 25, 2011, 12:58:51 PM »
You may want to double check your model number if it is a GSD2800D03 these are the replacement parts.  If you are talking about the detergent cup cover for this model the part is part #270966 at www.appliancepartspros.com is AP2039368 it also has a dispenser lever that is part #2330 at the same website AP2039379

To gain access: Please turn power off to the appliance.  You will need to take off the inner door by taking out the screw's around the outside of the inner door and then carefully pull off.  you will then have access to all the parts.

Double check the model number because the parts I listed are for the model I posted.

Hope this helps.

Offline Jim214

  • VIP Member
  • Member Since: Aug 2011
  • Posts: 13
Re: GE 2800 dishwasher dispenser lid broken
« Reply #4 on: September 26, 2011, 07:39:43 AM »
Thanks for the reply...it is a GSD2800D03.  My eyes are going.  Anyways, I have the inner door off.  Does anyone have a diagram or picture of how the assembly should sit?  The spring & the gadget attached to the lever were lying on the bottom unattached.  It appears that only the lever is broken, I just dont know where the spring goes & how the device should sit.
 

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 474
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: GE 2800 dishwasher dispenser lid broken
« Reply #5 on: September 26, 2011, 12:07:20 PM »
Does look like the pieces?
#1 hooks on a groove cut into the dispenser arm, #2 hooks onto a tab built onto the inner door panel.

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 474
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: GE 2800 dishwasher dispenser lid broken
« Reply #6 on: September 26, 2011, 07:16:13 PM »
Just to make sure we're on the same page...the part's diagram's don't give me a good visual for wiring or location and I don't have one around right now to open up so I've been searching the web for pictures to help do these look like what you have?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9606
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: GE 2800 dishwasher dispenser lid broken
« Reply #7 on: September 27, 2011, 08:04:38 AM »
Here are some photo Jim sent me to resize for him. Thought I would just go ahead and post them here too.



Hope you find our website helpful.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9606
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: GE 2800 dishwasher dispenser lid broken
« Reply #8 on: September 27, 2011, 08:05:07 AM »
Two more...
Hope you find our website helpful.

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 474
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: GE 2800 dishwasher dispenser lid broken
« Reply #9 on: September 27, 2011, 12:33:15 PM »
Thanks AJ.

Oy, anyone have any thought's on this one?

JW do you have anything in your archives of sublime knowledge?

 

Eurotech Dishwasher Broken Power Button

Started by TechnicianBrian

Replies: 0
Views: 2798
Last post April 14, 2008, 10:04:51 PM
by TechnicianBrian
GSC3200J Broken glass in a GE dishwasher

Started by Dsel

Replies: 3
Views: 4977
Last post September 28, 2008, 10:58:54 AM
by JWWebster
8558129 Whirlpool Dishwasher Dispenser

Started by AJ

Replies: 0
Views: 4412
Last post April 05, 2009, 02:24:17 PM
by AJ
Dishwasher soap dispenser not operating to dispense detergent

Started by Bill

Replies: 1
Views: 2478
Last post May 29, 2009, 05:21:00 AM
by Repair-man
9740171 KitchenAid Dishwasher Detergent Cup Dispenser

Started by AJ

Replies: 0
Views: 3698
Last post July 10, 2009, 11:41:01 AM
by AJ
Dishwasher with LE code. motor replaced, no broken wires, still busted

Started by lefthook1729

Replies: 8
Views: 3506
Last post June 21, 2011, 10:31:30 AM
by lefthook1729