Author Topic: KitchenAid KSCS25INWH00 - replacing ice maker feed tube  (Read 1158 times)

Offline BobgBobg

  • VIP Member
  • Member Since: Sep 2011
  • Posts: 2
KitchenAid KSCS25INWH00 - replacing ice maker feed tube
« on: September 17, 2011, 11:25:07 AM »
Quick question...the tube that runs from valve to the top of my freezer (above the ice maker) has dried out and broken.  I know that I need part # AP3182503 which has the black fitting on one end (for water output above ice maker)....BUT here's my question.   If I remove the old tube by pulling out through the top of my freezer, how hard is it to feed the replacement tube through so it exits out the back of the freezer.   I'm a little freaked out to pull it out the whole way...afraid I'll be SOL.

Any advice?
Thanks,
Bob


Model KSCS25INWH00


Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1141
  • Country: us
    • Buy me a beer through paypal
Re: KitchenAid KSCS25INWH00 - replacing ice maker feed tube
« Reply #1 on: September 17, 2011, 03:58:33 PM »
Where is it broken? Down by the compressor? I get a 1/4 compression union and a couple of feet of 1/4 plastic tubing from the hardware store, and splice them together. Make sure you get the ferrules and inserts made for plastic.

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: KitchenAid KSCS25INWH00 - replacing ice maker feed tube
« Reply #2 on: September 17, 2011, 07:38:22 PM »
Never had a problem, but if you want just pull the old one out with a string tied to the other end. Then you can connect the string to the new one to help pull it through.

When pulling other small water lines I run a small screw in the end of the plastic tube and tie the string around the head of the screw.

Offline BobgBobg

  • VIP Member
  • Member Since: Sep 2011
  • Posts: 2
Re: KitchenAid KSCS25INWH00 - replacing ice maker feed tube
« Reply #3 on: September 19, 2011, 09:56:05 AM »
Thanks gentlemen!  Part should arrive Wed or Thursday.  I'll let you know how I make out.

"theoldstoveguy" - It was too late to fix with compression fitting and piece of tube...I already ordered part.  Damn!

Thanks for your advise....

Bob

 

How to replacing water line in freezer door for Ice maker?

Started by jet713

Replies: 2
Views: 3729
Last post August 21, 2008, 10:33:33 PM
by BrntToast
KitchenAid Rerigerator Ice Maker Problems

Started by sneakers

Replies: 4
Views: 5490
Last post January 27, 2009, 01:17:00 PM
by sneakers
4389174 Whirlpool Refrigerator Ice Maker Fill tube and Heater Kit

Started by AJ

Replies: 0
Views: 2666
Last post July 02, 2009, 08:10:27 AM
by AJ
Whirlpool and KitchenAid Indoor Ice System - Ice Maker Diagnostics Mode

Started by AJ

Replies: 0
Views: 675
Last post July 21, 2012, 09:37:54 AM
by AJ
KitchenAid ice maker gets stuck

Started by michaeljc70

Replies: 4
Views: 1170
Last post November 12, 2012, 10:20:30 AM
by AJ
ksrg25fkbt04 Kitchenaid Ice Maker Will Not add Water for the Ice Tray

Started by King-Pin

Replies: 6
Views: 788
Last post February 23, 2013, 04:57:17 PM
by tgoods