try these tests:
UNPLUG THE DRYER and set the dryer dial to mid cycle, Infinite Heat switch.
Find the only pin on the power cord that will beep between that pin and to each side of the cycling thermostat.
And then between that same pin to each side of the Hi-Limit thermostat.
Continue checking between that pin and each side of the heater.
OK I set the dial to mid-cycle, unplugged the dryer, and tried to find the pin that would beep. I could not get the meter to beep on, the Hi-Limit thermo, or the either one of the pins on each side of the heater. BUT I could get it to beep when I touched either one of the leads to the fuse on the heater tube. Am I doing something wrong???
Forgot to ask where is the cycling thermo located???