motor connection

[frj]

i remove the motor for my washer Model awm352w, but know i forget its connection to its start clutch switch
is there any way to find it
looking forward

[AJ]

Hi,

I can not seem to find any information on that model number. Could you check to make sure it's correct?
Is this a USA washer or something that was made in another country?

[RegUS_PatOff]

I can't find a wiring diagram, yet, but

http://www.searspartsdirect.com

Speed Queen AWM352 used one of (3) different motors,

Emerson  30895 (?)

Emerson  30897

GE 30895 (?)

[frj]

it is speed queen , its motor Part # 27658,

There is a centrifuge switch on motor , which have wires color schem for motor side only, WHAT if i follow same color wires for other side also

[JWWebster]

On each wire is a letter or a number
 On the switch their are either letters or numbers. Just match the number or letter to the number or letter on the switch. Confused yet? Look closely on the switch it will be 14256 like that each wire might have a 12345 etc. Now it may be that each wires color may be marked on the switch. Like y b g r bl. Look for a number or a letter on each wire.

[frj]

i will check switch for any # ,
but what i am asking CAN I MATCH COLOR OF WIRES ON BOTH SIDES, what is confirmed is color of wires for motor to switch as given on switch cover plate.

[JWWebster]

You cannot be absolutely sure because the new motor maybe built to replace the old one but made by a different manufacturer. OOPs Never assume anythang. I have learned that the hard way.

[frj]

Yes i agree with u , thats  why i did not switch on it  yet, 
 but this is original motor,
i remove the switch to repair it, one this switch one holding was got  lose, (which is controlled by centrifuge lever )