Author Topic: Problems with oven warming up  (Read 874 times)

Offline cbanner

  • VIP Member
  • Member Since: Aug 2011
  • Posts: 2
Problems with oven warming up
« on: August 29, 2011, 11:00:01 AM »
I have a Frigidaire Electrolux Professional Series.  When we start the oven you can see the burner go on underneath but does not warm up.  You will also smell a slight oder of gas.  We had this problem awhile ago and unplugged it.  When it cam back on it was fine.  We have tried that but still does not warm up.  The stove top works fine.  Any ideas, thanks Chris.


Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Problems with oven warming up
« Reply #1 on: August 29, 2011, 11:11:33 AM »
... 316221001
... can see the burner go on underneath

1) that's the part number of the "Anti-tip" lable
2) can see the actual flame, or just a "glow" ?
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline cbanner

  • VIP Member
  • Member Since: Aug 2011
  • Posts: 2
Re: Problems with oven warming up
« Reply #2 on: August 29, 2011, 11:34:36 AM »
I have my wife at home right now reading me the numbers.  It could be a glow but it does heat up a little, maybe to 150 degrees or so.  The gas smell has me worried as well.

 

Jen Air double oven replaced control panel - still having problems

Started by mikevalin

Replies: 1
Views: 1506
Last post May 07, 2009, 09:31:04 PM
by Repair-man
Frigidaire oven temp sensor probe?

Started by jon

Replies: 1
Views: 6176
Last post July 08, 2007, 06:06:26 PM
by AJ
Jenn-Air self cleaning oven problem

Started by ralphthedog

Replies: 6
Views: 9625
Last post December 13, 2007, 08:15:34 PM
by ralphthedog
How can I find the manual for a Jenn Aire double oven?

Started by Dukes

Replies: 2
Views: 2475
Last post December 16, 2007, 04:40:06 PM
by Dukes
Maytag Double Wall oven lights

Started by jumptrout51

Replies: 2
Views: 3214
Last post December 23, 2007, 01:26:06 PM
by kjagmin
bosch convection oven

Started by JPG

Replies: 1
Views: 2908
Last post December 20, 2007, 09:19:33 AM
by Pegi