Forum > Dishwasher Repair

LE code

<< < (3/3)

Rayfacci:
Also now when I press rinse and delay start together while turning the unit on I get: n:3H then blinks to U:04
does this meaning something? It appears to be in a diagnostic mode

Rayfacci:
Wild and John thanks, however do I need to buy the whole assembly or can I just buy the motor or sump

john63:
<<<Well I replaced the PCB 6871dd1006E and I get the same damn results- LE code... Very frustrated.>>>

*******

That usually happens when someone sends you on a wild goose chase:)

Perform the following...and you're done:

Rayfacci

Replace the SUMP ASSY (AJH31248604)

Using electrical tape---wrap the wire loom inside the door from the bottom of the door up to the detergent dispenser assy.

Add a small section of cardboard between the taped wire loom & the black tar material. Re-install the door panel.

*******

<<<when I press rinse and delay start together while turning the unit on I get: n:3H then blinks to U:04
does this meaning something?>>>

*******

Not relevant---this is a factory check code (Software Version Numbers).

Navigation

[0] Message Index

[*] Previous page

Go to full version