Author Topic: DCS Range RGS3646GLSS burner nuts stripped  (Read 2487 times)

Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 705
  • Country: us
    • Buy me a beer through paypal
DCS Range RGS3646GLSS burner nuts stripped
« on: August 04, 2011, 12:58:57 AM »
RGS3646GLSS DCS

Torn apart by another service company... stripped burner nuts missing gas tubes. and broiler selector that will trip the GFI... what a job..

need a service manual and part list .. will need a lot of parts
Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!

Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 705
  • Country: us
    • Buy me a beer through paypal
Re: DCS Range RGS3646GLSS burner nuts stripped
« Reply #1 on: August 04, 2011, 11:47:52 PM »
Had an Idea to use a chisel and hammer to split the nut in half, to get it off.
Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: DCS Range RGS3646GLSS burner nuts stripped
« Reply #2 on: August 05, 2011, 05:02:11 AM »
I was unable to find a service manual for this one.
If you do find one please send me a copy, thanks.
Hope you find our site helpful.

Offline wildimaginations

  • Technician
  • Member Since: Jul 2011
  • Posts: 618
  • Country: us
Re: DCS Range RGS3646GLSS burner nuts stripped
« Reply #3 on: August 05, 2011, 06:39:58 AM »
Try calling DCS customer service directly.  888 281 5698.  They're in New Zealand.  Really friendly bunch of people ready to help 24/7.  I love their Australian accent. 

Good luck
Appliance Service Technician
Authorized servicer on LG appliances.
About 45 mins east of San Francisco

Online theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1321
  • Country: us
    • Buy me a beer through paypal
Re: DCS Range RGS3646GLSS burner nuts stripped
« Reply #4 on: August 05, 2011, 09:30:42 AM »
I have used a small drill to "split" the ring. Then expand it and remove it from the burner. Done a lot on Jenn Air and Dacor, Thermador.

Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 705
  • Country: us
    • Buy me a beer through paypal
Re: DCS Range RGS3646GLSS burner nuts stripped
« Reply #5 on: August 05, 2011, 05:27:43 PM »
The problem with this one is not just the ring but the whole three inch shaft and nut are stripped and just turn freely. I going to have to come up with away to get it off.
Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: DCS Range RGS3646GLSS burner nuts stripped
« Reply #6 on: August 05, 2011, 05:55:08 PM »
post some pix
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Hope you find our site helpful.

Offline nutznboltz

  • Technician
  • Member Since: Nov 2010
  • Posts: 13
  • Country: ca
Re: DCS Range RGS3646GLSS burner nuts stripped
« Reply #8 on: August 07, 2011, 11:10:18 PM »
Krazytech,  sent you manual which may be close to what you have.  See if it helps.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Hope you find our site helpful.

 

Whirlpool Range - Top Burner Not Working

Started by AJ

Replies: 0
Views: 4057
Last post December 28, 2007, 12:21:08 AM
by AJ
Need help with opening range top for gas stove to replace burner valve.

Started by bobafett13

Replies: 3
Views: 3704
Last post January 24, 2008, 10:57:06 AM
by JWWebster
Kitchenaid Range LR Burner Inoperative

Started by TechnicianBrian

Replies: 0
Views: 2006
Last post April 17, 2008, 07:39:22 AM
by TechnicianBrian
Maytag Smooth Top Range burner issue

Started by mtgappdrh

Replies: 4
Views: 5908
Last post November 22, 2008, 09:21:40 AM
by JWWebster
74004053 Maytag Gas Range Top Burner Igniter

Started by AJ

Replies: 0
Views: 3173
Last post April 02, 2009, 09:46:48 AM
by AJ
703650 Jenn-Air Range Infinite Burner Switch

Started by AJ

Replies: 0
Views: 3540
Last post May 03, 2009, 02:51:59 PM
by AJ