I have a whirlpool Duet Electric dryer model no GEW9200LQ0
The power is on
the controls light up
The inside lights turn on
I press the start button, a click sounds off, and the status light shows the "sensing" light is on.
I have opened the dryer door and pressing on the door switch causes it to click. So the door switch seems to be working.
No error codes are showing.
However when you turn the cycle knob some times the lights do not change, and I have to press the cancel button till all the light turn off, the press the control on button to see the cycle display change to the selected cycle. Other times is seems to work fine.
I also tried the diagnostic mode and all the light turn on and off, the selection knob lights turn on as you move the knob around.
No error codes come up or show on the display.
This leads me to think the problem may be in the thermestor, the thermal fuse, the belt, or the control panel.
Any suggestions on how to trouble shoot and diagnose the problem?