HBF05EABB Haier Kegerator

[jumptrout51]

Does anybody have any specs on this unit?
Suction pressure?
Operating Temperature?

[JWWebster]

280 psi on the high side and 120 psi on the low side is what it says but I think that is BS
Any of these I ever seen are around 5 psi on the low side. These crappy Haier's  .
To get to the service manual go to Haier site and log in.

[JWWebster]

Specs

[jumptrout51]

That refers to Design Pressure not operating pressure.
The specs you found is what I needed to know.
I replaced the evaporator in one yesterday.
The compressor felt really hot to me,176 degrees.
According to specs it can go to 194 without issues.
It holds 2.1 ounces of R-134a.
Amp draw is normal too.
Been running 24 hours now and holding at 25 degrees on a mid level cold control setting.
Seems all is good to go.
Thanks for the manual.

[jumptrout51]

P.S. How do you log in to Haier?
I have no Haier account number.

[JWWebster]

Use the Foggy Link dude.  

What is the suction pressure on that puppy? 5 to 7 PSI?

[jumptrout51]

Suction about minus 3.
Started out at plus 5 after it was charged.
After it cooled down it dropped.
The amp draw is .8 out of possible 1.3.
That is good.
Compressor dome temp is below max.
That is good.
Kind of wishing it was mine.

[JWWebster]

At least he oughta let ya try it out. You betta keep it in your shop under observation for a month or more to make sure it s functioning ok