Author Topic: Frigidaire Dryer Model FEQ1442CES0 Error Code 9E  (Read 2563 times)

Offline CBEREZAY

  • VIP Member
  • Member Since: Jul 2011
  • Posts: 1
Frigidaire Dryer Model FEQ1442CES0 Error Code 9E
« on: July 21, 2011, 09:32:22 PM »
My dryer beeps frequently while in use, and either does not heat at all, or heats for a very short time. 

I looked up manuals to find the procedure to get the error codes, however, the code I am given after following the steps is not listed. 

The instructions were:
Turn the cycle selector knob to the 3 o'clock position
Hold the select and pause/cancel buttons simultaneously for 6 seconds
Hold the start and pause/cancel buttons simultaneously for 4 seconds
Turn the cycle selector knob to the 2 o'clock position and count the beeps of both the 4 indicator lights and the start button.

The 4 indicator lights flashed 9 times
The start light flashed 14 times

A note below the instructions indicates that once the flashing hits 10 times, a letter is represented rather than a number a=10, b=11, c=12, d=13, e=14

Did I read the code right? If so, what does error code 9E mean, and how can my dryer be fixed? Any help would be appreciated, thank you!

Model FEQ1442CES0

donate
$1, $2, $5, $10, $20, $50
 

Frigidaire Front Load Dryer Error Code DR

Started by sharitac

Replies: 6
Views: 14379
Last post April 26, 2009, 09:07:40 AM
by JWWebster
Frigidaire Affinity dryer error code 68

Started by hopesmama

Replies: 4
Views: 6597
Last post August 21, 2011, 11:13:24 AM
by AJ
GE Gas Dryer E61 Error Code, Model# DCVH515GF1WW

Started by resapp

Replies: 6
Views: 1766
Last post July 04, 2012, 04:13:32 PM
by JWWebster
Whirlpool Steam Dryer F23 Error Code

Started by TechnicianBrian

Replies: 2
Views: 5648
Last post April 25, 2008, 08:25:02 PM
by TechnicianBrian
Error code 40 on Oasis Elite Dryer

Started by MWCmike

Replies: 3
Views: 3813
Last post September 16, 2008, 03:36:21 PM
by Repair-man
Frigidaire error code E9E

Started by thansen

Replies: 2
Views: 4935
Last post October 26, 2008, 02:40:02 PM
by thansen