Author Topic: Arghh, Help,It wont agitate.  (Read 3538 times)

Offline crzylgzz

  • VIP Member
  • Member Since: Jun 2011
  • Posts: 5
Arghh, Help,It wont agitate.
« on: June 21, 2011, 08:59:44 AM »
 :tickedoff:


ok, for starters, under no circumstances will my 20 plus year old machine go to the landfill like a previous poster did. This Kenmore series 70 heavy duty washing machine was given to me by my gramps when i moved out.

with the parting words of  a woman will love you, broke,hungry, lonely, but but a woman will never love a man with dirty skivvies.

so i kept this machine with me since then...

just a few days ago, the machine crapped out... :tickedoff:

ok here is the problem...

1.  the water fills.

2. the machine starts but does not agitate. it goes through the motion of washing but the center piece doesnt spin it just sits there.. the bottom portion  moves but very minimally.

3.   the machine reaches the spin stage then dumps its water and starts the rinse cycle and  it does it again.. no agitation..

Im mechanically inclined, but im certianly no pro... can someone point me in the right direction..  ill dump my girlfirend before i dump my machine.
Thanks in advance.

Model 110.81878110

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9590
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Arghh, Help,It wont agitate.
« Reply #1 on: June 21, 2011, 09:08:34 AM »
Quote
1.  the water fills.

2. the machine starts but does not agitate. it goes through the motion of washing but the center piece doesnt spin it just sits there.. the bottom portion  moves but very minimally.

3.   the machine reaches the spin stage then dumps its water and starts the rinse cycle and  it does it again.. no agitation..

Sounds like you need to replace the agitator Dogs, $2.79.

This video will show you how to replace the dogs.



Hope you find our website helpful.

Offline crzylgzz

  • VIP Member
  • Member Since: Jun 2011
  • Posts: 5
Re: Arghh, Help,It wont agitate.
« Reply #2 on: June 21, 2011, 09:13:40 AM »
ok... this is simple enough...but i gotta admit im quite annoyed.

i cant believe  the video made me go DUH!!!!

now the next question is...which part # do i need,  or is this a general part which fits most models , like a vacuum cleaner drive belt.

Offline crzylgzz

  • VIP Member
  • Member Since: Jun 2011
  • Posts: 5
Re: Arghh, Help,It wont agitate.
« Reply #3 on: June 21, 2011, 09:19:08 AM »


Agitator cam assembly
PART NUMBER: 285748

  is this the part i need.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9590
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Arghh, Help,It wont agitate.
« Reply #4 on: June 21, 2011, 09:21:16 AM »
Click here to order the 'dogs' for your washer.

Its the same link I posted above for the 'Dogs, $2.79'.

I looked up your model number to see what you had to start with, but these dogs are common to all direct drive style washers such as yours.

Your washer has a two piece agitator. The bottom part agitates back and forth in the same spot. The top part of the agitator is made to ratchet in one directions.

With the washer off and the lid open you should be able to place your hand on top of the agitator and turn it one direction with out the bottom half moving. When you try to turn the top of the agitator the opposite directions the dogs should keep it from turning.

If you can freely move the top of the agitator by hand both directions then the 'dogs' need to be replaced.

The washer spins ok?
Hope you find our website helpful.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9590
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Arghh, Help,It wont agitate.
« Reply #5 on: June 21, 2011, 09:25:23 AM »


Agitator cam assembly
PART NUMBER: 285748

  is this the part i need.

If your dogs are bad that part would work, but it's really more then you need.
Hope you find our website helpful.

Offline crzylgzz

  • VIP Member
  • Member Since: Jun 2011
  • Posts: 5
Re: Arghh, Help,It wont agitate.
« Reply #6 on: June 21, 2011, 09:37:52 AM »
Click here to order the 'dogs' for your washer.

Its the same link I posted above for the 'Dogs, $2.79'.

I looked up your model number to see what you had to start with, but these dogs are common to all direct drive style washers such as yours.


If you can freely move the top of the agitator by hand both directions then the 'dogs' need to be replaced.

The washer spins ok?

yes this is exactly what my machine does....thank you sir..

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9590
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Arghh, Help,It wont agitate.
« Reply #7 on: June 21, 2011, 10:33:45 AM »
Glad I could help. Let us know how the repair goes after you get the parts and if you have any other questions.
Hope you find our website helpful.

Offline crzylgzz

  • VIP Member
  • Member Since: Jun 2011
  • Posts: 5
Re: Arghh, Help,It wont agitate.
« Reply #8 on: June 21, 2011, 12:51:33 PM »
update.....

AJ, thanks for your guidance, i removed the inner assembly ( agitator..thinga majig, and  removed the DOgs as per the video, and sure enough the dogs were stripped smooth.  Now when i get paid.. ill order the part, and  ill be good to go.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9590
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Arghh, Help,It wont agitate.
« Reply #9 on: June 21, 2011, 01:18:28 PM »
 O0
Hope you find our website helpful.

 

LXR9245EQI will agitate wont spin

Started by whit

Replies: 1
Views: 1590
Last post November 15, 2008, 02:53:51 PM
by Repair-man
whirlpool washer will agitate wont spin

Started by whit

Replies: 1
Views: 2742
Last post November 15, 2008, 03:07:35 PM
by JWWebster
washer wont agitate ---glws1233as2

Started by fgroce

Replies: 6
Views: 2625
Last post January 10, 2009, 10:08:53 AM
by JWWebster
Maytag wont spin, agitate, or drain - also smell something burning

Started by DeaconDad

Replies: 1
Views: 5600
Last post August 09, 2009, 05:39:51 AM
by Repair-man
whirlpool washer wont spin or agitate already replaced coupling what else??

Started by crazy7605150

Replies: 10
Views: 5374
Last post October 12, 2009, 10:53:21 PM
by Washaman
Washer wont agitate

Started by oscar333

Replies: 0
Views: 1254
Last post January 21, 2010, 08:31:13 AM
by oscar333