I checked out the speed board in the back of the washer and found a loose plug that had green and black wires to it. I opened the control box up and made sure that the other plugs were tight as well. They are like the plugs in a computer the plug onto the motherboard. While I had the back opened, I pulled the filter out and found underwire and bobbie pins along with 78 cents. There is not much room to maneuver under the tube of the washer and getting the hose clamp back on tightly was a bear. Some not so nice words were muttered. This is not the first time that I have opened the washer up. The door lock mechanism has been replaced before. With a front load washer the smell coming from it can be overbearing and leaving the washer door open to dry out the tube once awhile helps but... with a door too close to the washer the washer door had been slammed. This broke the interior parts of the mechanism. Thank you all for the help. I will always come back to this forum for any help in eliminating appliance problems. I guarantee that I will not buy another Frigidaire washer again. Thank you all, William Steen.