The pulley on the blower unscrewed itself while running, of course the belt is off.
The pot metal pulley is ok, I got it back on, but I am not sure how far this should go onto the shaft. There is no lock nut to keep this on, at least none that I can find on a parts list or laying inside the machine some place.
So, do I thread the nut all the way to the bottom? If so, how do I keep the shaft from spinning while tightening this thing? Should I use blue loctite on the pulley?
What is the correct belt placement? I dont want it running backwards...
Final question... Is there a service manual for this machine or just the three parts sheets with an exploded view?
Jesse in Ashland, Pa.
Drive Belt Part # 8544742