Author Topic: will not work  (Read 2267 times)

Offline brad

  • VIP Member
  • Member Since: Aug 2007
  • Posts: 218
will not work
« on: June 03, 2011, 07:26:08 PM »
I have a Maytag Centennial washer model no MVWC200XW0 that is having trouble starting up and filling with water.I have already checked the water valves and they OHMED out to 1145 ohms.Instead of a timer it has a circuit board.I need trouble shooting help and a manual.If some of you guys can help, please do so.Thanks for your time.

Model MVWC200XW0

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9423
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: will not work
« Reply #1 on: June 03, 2011, 07:39:36 PM »
I could not find the service manual, but here is the tech sheet if it's any help.

https://files.me.com/appliancejunk/otpnsw


Hope you find our site helpful.

Offline brad

  • VIP Member
  • Member Since: Aug 2007
  • Posts: 218
Re: will not work
« Reply #2 on: June 03, 2011, 08:07:30 PM »
Thank you for the tech sheet.I'll see what I can do with it,thanks so much

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 554
  • Country: us
Re: will not work
« Reply #3 on: June 03, 2011, 10:10:35 PM »
  I think the Whirlpool Vertical Modular manual is the same. Job aid W10329932. I might be wrong.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9423
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Hope you find our site helpful.

Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 705
  • Country: us
    • Buy me a beer through paypal
Re: will not work
« Reply #5 on: June 04, 2011, 12:31:15 AM »
Check you drain hose first .. If the hose is too far down the stand pipe. it may have been siphion the water out. This the cause the load level switch to burn out.  Then no water will come in. With the timer in the on position Check for 120v on the purple wire  to ground. If you have voltage and no water then bad load switch.
Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!

 

Washer does not work.

Started by Bigmetalman

Replies: 15
Views: 6533
Last post April 11, 2008, 04:08:47 PM
by Repair-man
The agitator don't work

Started by mrjoe

Replies: 2
Views: 1343
Last post November 25, 2008, 11:05:58 PM
by JWWebster
not sure how to get the washer to work

Started by andreastansbury

Replies: 2
Views: 1176
Last post December 17, 2010, 10:12:23 AM
by jumptrout51
Maytag Neptune ill not work

Started by sratt09

Replies: 1
Views: 1844
Last post July 08, 2011, 07:44:10 AM
by AJ
maytag washer MAH5500BWW does not work on delicate cycle

Started by avi

Replies: 4
Views: 2520
Last post October 30, 2011, 08:16:28 PM
by avi
Fabric Softener Does Not Work

Started by ty

Replies: 3
Views: 785
Last post December 21, 2011, 09:03:51 AM
by bigbuck