electrolux dishwasher

[baciiballs]

error light comes on and blinks 11 i checked for kinks in line there is none also i put dishwasher on quick cycle and it makes almost to end with about 10 min left then error light comes on some one please help before i throw this thing away

Model EIDW6305GS0

[krazytech]

all light blink is a leak error pull it out and remove bottom cover and check for water.

[baciiballs]

thanks for the advice but you dont know what i went through with this washer.  It has been getting this error light for a while.  I changed every rubber part u can change and replaced a motor.  Do have any other suggestions?

[PARTech]

Check the 'o' ring on the turbidity sensor and the wire harness, this was a problem in ?'09?.  New sensor 'O' ring and wire harness were shipped in the kit, with two? hoses. Working from memory so I'll see if I can find the rest of the info.

[baciiballs]

thanks i just checked o ring do u suggest any thing else to check?

[PARTech]

Check the wire harness(es) for corrosion on the bottom of the machine.   That seems to have been part of the problem as well and causing this and other errors.

[krazytech]

so was there water under the dishwasher?

1) drain pump leaking
2) drain hose needs a single high loop
3) Drain valve not opening check connection
4) wash assy hose ( this is in the middle)