Frigidaire Gas Range - bake burner lights but does not come back on when hot

[JimRice]

I've had this range for about three years. This week, I was preheating the oven to 485 to bake a pizza. When I checked on it, the oven was warm, but the burner was not coming on to keep it hot. I made the assumption it was the igniter starting to fail, and replaced it. However, that has not fixed the problem. It will light when cold, and get up to temp, but then will not re-light when hot to keep the oven hot. The control panel lights will show the correct temp, and show that it's trying to light the oven, but the igniter stays dark and no gas is flowing. Any help will be appreciated.

(I replaced the igniter with a factory part, not the universal one. It was easier because the connector was the correct one, so no fooling around with cutting and twisting wires. Those factory ones are expensive.)

Model GLGFZ386FCG

[jumptrout51]

Ohm the temperature sensor. If it is OK at 1100ohms + or- 50 replace the oven control.


Temperature Sensor Part # 316490000


Oven Control/Clock Part # 316557206