Author Topic: W620 Asko washer door will not open  (Read 1357 times)

Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 572
  • Country: us
    • Buy me a beer through paypal
W620 Asko washer door will not open
« on: May 16, 2011, 09:57:41 PM »
Asko washer door open button will not open the door replace button door switch and door lock,,,

push the button after spin and you can hear a relay on control click,

but nothing to to door lock

with door open

gray/red has 110v
gray 0v
orange 110v

any ideas? thinking control or wire


Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!

Offline Kiwi_tech

  • VIP Member
  • Member Since: May 2011
  • Posts: 9
  • My Boy and my Rig!
Re: Asko washer door will not open
« Reply #1 on: May 23, 2011, 08:51:07 PM »
What voltage is supplied to the door solenoid? have you tried feeding the solinoid direct (run a jumper wire with the correct voltage and an inline switch to mimic operation.

could it be out of alignment or adjustment? or partially siezed?

have you traced the circuit back to its source to check for continuity and or high resistance connections?

Just a couple of ideas.... I am sure you have but hey good to bounce ideas aye?!
Cheers
Shane - Kiwi-tech


 

How to open a Maytag A183 top loading washer

Started by JSG

Replies: 3
Views: 11689
Last post September 15, 2007, 12:25:24 PM
by AJ
How to replace a Whirlpool Duet washer bellow tub door seal

Started by AJ

Replies: 35
Views: 55370
Last post February 03, 2012, 09:02:19 PM
by bigbuck
samsung washer front door leaks

Started by gabriord

Replies: 4
Views: 3847
Last post October 06, 2011, 04:55:40 PM
by Canuckistan
Whirlpool Duet Sport Front Load Washer Leaking from the Door

Started by TechnicianBrian

Replies: 1
Views: 10266
Last post May 23, 2013, 08:24:30 PM
by Rick32k
Whirlpool/Kenmore Front loading Washer door

Started by momnesmith

Replies: 1
Views: 924
Last post August 27, 2008, 09:33:47 PM
by Al Capone
Bosch Washer Door not Locking

Started by TechnicianBrian

Replies: 0
Views: 1617
Last post October 18, 2008, 06:03:24 AM
by TechnicianBrian