My Whirlpool DU1100XTPS7 seems to run as normal, but it does not drain the water out of the tub at the end of the cycle. You can hear the sound of the motor, but nothing drains out. I checked the drain tube, and that is clear. I snaked my finger around in the spot where the drain hose connects to the machine, and pulled out a small chip from a dish. I've now completely disconnected the machine and pulled it from under the counter top to get a better look.
Now I'm stuck. I don't know what else to check, and I have no idea how to take any other parts off. I've asked this question elsewhere, and I get links to the factory diagrams and instructions to "check XXXXX", but I can't get any guidance on how to disassemble the parts to actually see what's going on. There aren't obvious screws holding this thing together that I've been able to figure out.
Any guidance on what I should check and how to get there would be greatly appreciated. Thanks.