Author Topic: PE error code  (Read 2795 times)

Offline abdo2008

  • VIP Member
  • Member Since: Feb 2011
  • Posts: 50
  • Country: ca
PE error code
« on: May 03, 2011, 08:45:40 AM »
HI I have a problem with a washer Model number WM2501HW displayed a PE .I have already changed a sensor pressure switch assembly and the problem remains the same thanks

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: PE error code
« Reply #1 on: May 03, 2011, 09:03:43 AM »
Did you blow through the tubing to dislodge any sediment in there which could be impeding the air flow back up to the pressure switch? Did you remove the water after doing so? The water must be removed and the tubing clear of trash AND re-secured tightly to the switch so the pressure can build normally.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline abdo2008

  • VIP Member
  • Member Since: Feb 2011
  • Posts: 50
  • Country: ca
Re: PE error code
« Reply #2 on: May 03, 2011, 01:19:02 PM »
HI JW
I have already done this before but the code starting PE appears as soon as you start the machine one minute max after

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 554
  • Country: us
Re: PE error code
« Reply #3 on: May 03, 2011, 03:09:31 PM »
  Did the pressure switch assy. come with a new hose? If not closely inspect the pressure switch hose for a small hole or wear spot.

Offline ian_ian11

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 19
  • Shop Tech
Re: PE error code
« Reply #4 on: May 03, 2011, 05:09:00 PM »
Yeah, I agree with what MajorApp says. Check out the pressure sw hose. Sometimes if the tub moves around a lot, there can be a small hole that has been rubbed into the hose after some use.

 

Whirlpool electronic error code

Started by roxgirl

Replies: 1
Views: 5617
Last post July 25, 2007, 08:15:36 PM
by AJ
Whirlpool Duet Washer - F-30 error code and clunking noise in detergent area.

Started by AJ

Replies: 3
Views: 14104
Last post November 15, 2009, 09:34:58 AM
by AJ
Kitchenaid Washer F11 Error Code

Started by TechnicianBrian

Replies: 0
Views: 5463
Last post March 23, 2008, 07:06:27 AM
by TechnicianBrian
error code F-05

Started by longbay102

Replies: 9
Views: 5611
Last post June 12, 2008, 05:41:37 PM
by whirlpooltech
Maytag Washer F01 Error Code

Started by TechnicianBrian

Replies: 0
Views: 7977
Last post June 17, 2008, 07:13:27 AM
by TechnicianBrian
LG Front Load Washer LE Error code

Started by TechnicianBrian

Replies: 43
Views: 102985
Last post March 12, 2012, 08:01:50 AM
by roodog