PE error code

[abdo2008]

HI I have a problem with a washer Model number WM2501HW displayed a PE .I have already changed a sensor pressure switch assembly and the problem remains the same thanks

[JWWebster]

Did you blow through the tubing to dislodge any sediment in there which could be impeding the air flow back up to the pressure switch? Did you remove the water after doing so? The water must be removed and the tubing clear of trash AND re-secured tightly to the switch so the pressure can build normally.

[abdo2008]

HI JW
I have already done this before but the code starting PE appears as soon as you start the machine one minute max after

[MajorApp]

  Did the pressure switch assy. come with a new hose? If not closely inspect the pressure switch hose for a small hole or wear spot.

[ian_ian11]

Yeah, I agree with what MajorApp says. Check out the pressure sw hose. Sometimes if the tub moves around a lot, there can be a small hole that has been rubbed into the hose after some use.