Author Topic: Frigidaire Dishwasher Leaking From Door  (Read 2190 times)

Offline SchlockRod

  • VIP Member
  • Member Since: Apr 2011
  • Posts: 1
Frigidaire Dishwasher Leaking From Door
« on: April 25, 2011, 08:01:13 PM »
There's a whole lot of people with FDB model #s that have leaks.
Can anyone tell me what's likely wrong with this FMB one? (service bulletins, etc. appreciated) FMB330RGS0
Leaking at bottom left corner. Is full of dishes top & bottom.
Bottom seal does not look like the one I've seen pix of on those other models. This is like a double flap of black rubber. It's bent a little flatter in one spot, but I don't know if that's enough to cause leak.
Bottom seal was caked up with crud as was sheet metal that it contacts. I cleaned both with scrubber sponge.
Still leaking.
Side/Top seal looks OK.
DW is level but there was about 1/2 inch of water in the bottom when I opened it during spray cycle as it was leaking heavily. Is that normal? I pulled the drain strainer out and water didn't go down. Now I've opened it during part of cycle w/o spray, and there is no water.
See pictures:
1. Side seal and bottom seal from inside. 2&3. Flattened part of bottom seal.

Help!
Over...

Model FMB330RGS0



Follow us on Google+
 

Frigidaire Dishwasher Leaking from the Door

Started by TechnicianBrian

Replies: 8
Views: 29227
Last post December 14, 2011, 04:09:22 PM
by whirlpooltech
Frigidaire Dishwasher Leaking from the Door

Started by jaikens

Replies: 8
Views: 6192
Last post February 28, 2010, 05:04:28 PM
by whjeffs
Frigidaire Dishwasher Leaking from the Door

Started by meindl

Replies: 9
Views: 3646
Last post November 19, 2010, 07:12:05 PM
by jumptrout51
Frigidaire Dishwasher Leaking from the Door

Started by thundercleese

Replies: 0
Views: 2020
Last post January 05, 2011, 07:47:20 PM
by thundercleese
Frigidaire Dishwasher Leaking from the Door

Started by BlackThumbEDQ

Replies: 4
Views: 3434
Last post February 11, 2011, 11:26:24 AM
by PARTech
Frigidaire Dishwasher Leaking

Started by TechnicianBrian

Replies: 0
Views: 4520
Last post April 13, 2008, 04:38:22 PM
by TechnicianBrian