Author Topic: GE front loader goes straight to pump  (Read 1364 times)

Offline donmac50

  • VIP Member
  • Member Since: Apr 2011
  • Posts: 2
GE front loader goes straight to pump
« on: April 22, 2011, 04:06:01 PM »
Whenever I switch on my machine it starts making a beeping noise, then the pump come on and the door locks. The only way I can stop the pump is by unplugging. It does not let me go into test mode either. It is clearly detecting water level at overflow even though the machine is empty. I have tried replacing the water switch and this did not help. I tried disconnecting the hose from the switch to see if it is getting a false reading from pressure in the hose.. This didn't work either.. There is no noticeable broken or loose wiring. I am totally baffled.

Can somebody give me some suggestions as to the cause?

Model WBVH6240F0WW


Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE front loader goes straight to pump
« Reply #1 on: April 22, 2011, 05:28:10 PM »
Did you blow through the tubing to get rid of sediment, resecure the hose and pump out water in the machine before retrying?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline donmac50

  • VIP Member
  • Member Since: Apr 2011
  • Posts: 2
Re: GE front loader goes straight to pump
« Reply #2 on: April 23, 2011, 01:23:56 PM »
Your suggestion indirectly helped me solve the problem. I was in the process of taking off the front panel to better access the hose when I saw that one of the harness connectors to the door lock had come loose. Reconnecting it solved my problem and the machine is now working fine. Who would have thought that a disconnection at the door lock would cause the machine to think it had a high water level status.

It is a good lesson for fault diagnosis that the causes are not always obvious. Thank you, JJW, for trying to help.

 

Video: Whirlpool Duet Front Load Washer Water Pump Clean Out.

Started by AJ

Replies: 0
Views: 6804
Last post November 28, 2007, 09:58:47 PM
by AJ
Replacing Front Load Washer Pump Model#LHW0050PQ

Started by resapp

Replies: 4
Views: 2863
Last post May 22, 2012, 12:34:13 PM
by AJ
Frigidaire front loader (MAGNET)

Started by chic

Replies: 3
Views: 4434
Last post April 16, 2008, 07:28:44 PM
by chic
Whirlpool duet front loader Control Locked light on

Started by nick11

Replies: 6
Views: 6888
Last post September 21, 2008, 04:18:42 PM
by Al Capone
Front loader intermittently fills with water

Started by Junipergirl

Replies: 5
Views: 2605
Last post September 27, 2008, 02:26:44 PM
by Junipergirl
Frigidaire Front loader will not spin

Started by tburrows

Replies: 8
Views: 7642
Last post November 23, 2008, 07:40:47 AM
by chic