Author Topic: Freezer evap motor replacement- rpms?  (Read 2632 times)

Offline tcape

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 73
Freezer evap motor replacement- rpms?
« on: April 13, 2011, 06:42:37 PM »
Had a call this afternoon, a freezer evap motor not working. All I had on my truck was one of those universal evap motors and it worked fine, however it runs at 3000 rpms. I also used one of the fan blades that came with the motor, it had 5 blades instead of 4 like the original. rotation was the same and everything works for now.

Do the oem motors run at near the same rpms?

I told the customer I would have to check to see if my repair would be temporary or permanent.

Comments?

Thanks


Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Freezer evap motor replacement- rpms?
« Reply #1 on: April 13, 2011, 08:27:25 PM »
It goes by the poles on the stator. The EM249 and EM999 you have 2 poles so 3000 rpm. As you may know you can also reverse the motor by turning the stator around. Whichever side the copper is on the blade will go in the opposite direction like the Marrs 90999.
« Last Edit: April 13, 2011, 08:32:10 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Freezer evap motor replacement- rpms?
« Reply #2 on: April 14, 2011, 06:56:17 AM »
The thickness of the steel plates of the motor determine amperage and speed.
The plates are referred to as stacks.
The stacks are usually 1/2 inch,5/8,3/4 etc.
If the stack is close to the original motor it will be fine.
Take a Kid fishing.

Offline tcape

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 73
Re: Freezer evap motor replacement- rpms?
« Reply #3 on: April 14, 2011, 03:42:51 PM »
Everything is working fine on the freezer, I went back today to follow up....

Thanks for the input!

 

Frigidaire Evap Fan motor not working

Started by jumptrout51

Replies: 10
Views: 9535
Last post May 25, 2008, 02:55:57 PM
by JWWebster
freezer door water line replacement

Started by tagarman

Replies: 4
Views: 2879
Last post June 06, 2012, 09:16:40 PM
by niobrara
GE DC Evap Fan Motor

Started by thumbrfg

Replies: 15
Views: 6232
Last post April 12, 2009, 06:17:54 AM
by Repair-man
Kenmore freezer door left open - burning motor smell - 253.21041100

Started by Tootie

Replies: 9
Views: 2857
Last post June 01, 2012, 11:08:14 AM
by Bailey
G E side by side no fan motor evap comeen on

Started by williesanchez69

Replies: 3
Views: 2398
Last post December 22, 2010, 04:43:16 AM
by williesanchez69
Frigidaire 'NextGen' SxS w/ADC - intermittent evap fan motor operation

Started by JADsvc1

Replies: 3
Views: 1436
Last post November 29, 2012, 05:15:23 PM
by haroldsappliance