Author Topic: Maytag Gas Range igniter replacement?  (Read 3105 times)

Offline Tmeb

  • VIP Member
  • Member Since: Mar 2011
  • Posts: 2
Maytag Gas Range igniter replacement?
« on: March 29, 2011, 12:46:34 PM »
My Maytag MGR5875QDS range has been having a bit of trouble. :'(
Some days I set it and it starts right up. Some days it takes it more than 2 minutes and "whooshes" and then slowly heats up. It does seem that in the past few years it is taking it longer to heat up once it does get going.

Do I have two separate issues or will replacing the lower igniter bar do the job?

Thank you for any insight..or even direct me to another post that has attacked this issue. :)

Model MGR5875QDS



Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9329
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag Gas Range igniter replacement?
« Reply #1 on: March 29, 2011, 01:12:54 PM »
Quote
Do I have two separate issues or will replacing the lower igniter bar do the job?

I think you only have one problem and would replace the bake (lower) igniter.

I looked up your model number and it uses bake igniter part # 74008064 Oven Igniter, AP4096758



Hope you find our site helpful.
Follow us on Google+

Offline Tmeb

  • VIP Member
  • Member Since: Mar 2011
  • Posts: 2
Re: Maytag Gas Range igniter replacement?
« Reply #2 on: March 29, 2011, 01:43:43 PM »
Thank you! Now to get it and hand it off to the hubby. O0

donate
$1, $2, $5, $10, $20, $50
 

74004053 Maytag Gas Range Top Burner Igniter

Started by AJ

Replies: 0
Views: 2980
Last post April 02, 2009, 09:46:48 AM
by AJ
Maytag Range - Does not heat

Started by AJ

Replies: 4
Views: 8390
Last post February 23, 2008, 04:58:52 PM
by AJ
Maytag Range no Oven Operation

Started by TechnicianBrian

Replies: 0
Views: 2733
Last post March 29, 2008, 05:33:22 PM
by TechnicianBrian
16010161 Maytag Gas and Electric Range Service Repair Manual

Started by AJ

Replies: 0
Views: 5553
Last post April 03, 2008, 09:54:39 PM
by AJ
Maytag PGR5710BDQ Gas Range, Flashing lock light when bake or broil is pressed

Started by straycatt

Replies: 4
Views: 5281
Last post June 14, 2008, 11:19:00 AM
by straycatt
Maytag Ceramic Cooktop Range digital control panel display is stuck

Started by wghman

Replies: 2
Views: 2323
Last post November 02, 2008, 07:39:21 AM
by wghman