Author Topic: KE HE Stops Mid Cycle with Error F11  (Read 1481 times)

Offline Jaytag

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 143
KE HE Stops Mid Cycle with Error F11
« on: April 04, 2011, 07:36:42 AM »
HE washer with an error code mid cycle stop.  How should I start on the troubleshoot with this one?  Thank you

Model 110.45972400

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: KE HE Stops Mid Cycle with Error F11
« Reply #1 on: April 04, 2011, 08:42:26 AM »
    Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
    Check the Drive system for any worn or failed components
    Check MCU
    Check CCU
    Check Motor
    Check Wire Harness
Take a Kid fishing.

Offline weverette

  • Technician
  • Member Since: Jan 2011
  • Posts: 19
    • Dominion Appliance
Re: KE HE Stops Mid Cycle with Error F11
« Reply #2 on: April 04, 2011, 09:51:52 AM »
Also, with the top off, start the machine and tap the computer at the top back lightly with the handle of a screwdriver. Some of these are known for bad solder connections. Often called "clickers", they will not supply power to all areas needed. Often, tapping them will cause them to start. If this happens, replacement of the CCU is the fix.

Offline Jaytag

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 143
Re: KE HE Stops Mid Cycle with Error F11
« Reply #3 on: April 04, 2011, 07:33:35 PM »
I played with the wires to the CCM and it went through a cycle.  But then didnt go again.  I am going to replace the CCM.  I think that is the issue.

 

Roper Washer Stops during the Wash Cycle.

Started by TechnicianBrian

Replies: 1
Views: 2951
Last post May 28, 2013, 03:37:08 AM
by Rick32k
Stops at Spin Cycle

Started by djp

Replies: 4
Views: 1499
Last post March 05, 2009, 07:01:36 AM
by djp
Stops at Spin Cycle

Started by dkhesser

Replies: 10
Views: 2648
Last post March 10, 2009, 04:59:40 PM
by JWWebster
GE washer stops mid cycle & wont spin out completely

Started by kstump27

Replies: 2
Views: 7651
Last post July 07, 2009, 06:23:24 AM
by Repair-man
stops at last spin cycle

Started by 4uzindian

Replies: 3
Views: 1668
Last post December 21, 2009, 06:36:27 AM
by Repair-man
My washer- Whirlpool- stops in mid cycle

Started by tcape

Replies: 3
Views: 4651
Last post July 21, 2010, 07:38:19 PM
by jumptrout51