Case scenario (from this week end):
-ran a complete cycle on Saturday Night => no issue
- some items not dry enough and ran a second cycle immediately following the first => no issue
- let the dryer plugged overnight and try to run a cycle in the morning => nothing worked , no answer from touch pad
- unplug and wait an hour or so => half the touch pad was responding
- unplug and wait about 8 hrs => dryer works again
At the beginning, I thought it was a false contact problem. I was disconnecting and reconnecting the connector fro the touch pad to the control board and it seemed to solve the issue. Then it started acting more strangely. I replaced the board but the problem is still here.
I would really appreciate some help. I am running out of hair to pull.