Author Topic: Whirlpool Dryer Stopped Drying (LER8858EQ2)  (Read 14138 times)

Offline Agrajag

  • VIP Member
  • Member Since: Mar 2008
  • Posts: 41
Re: Whirlpool Dryer Stopped Drying (LER8858EQ2)
« Reply #20 on: December 11, 2009, 04:41:38 PM »
The piece I'm talking about (maybe I need to snap a picture of it) has the heating element ends connected to it.

Offline Agrajag

  • VIP Member
  • Member Since: Mar 2008
  • Posts: 41
Re: Whirlpool Dryer Stopped Drying (LER8858EQ2)
« Reply #21 on: December 11, 2009, 04:57:05 PM »
And appears to be part of the heating element itself now that I see that part in the list.

So that suggests it might again be the bias stat. What should I read from this? It has 4 posts that I call North/South and East/West. NS is red wired and EW is purple wired.

When disconnected NS has continuity (goes to zero) and EW lands around 7.

Everything else seems to have continuity. For the plain stats I direct-connected them (for testing only) and that didn't get the element to come on. It'd be great to fix this as I'm between jobs and spending $150 for PSE&G to come out to fix it would hurt right now.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Whirlpool Dryer Stopped Drying (LER8858EQ2)
« Reply #22 on: December 11, 2009, 05:51:55 PM »
If it has 4 wires, that's the Bias Thermostat.
Only 2 connections will have continuity.

No need to disconnect wires to check for contiuity.

The part in the picture is the Thermal Fuse.
Is it good ?

and How is the Vent system ?
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirlpool Dryer Stopped Drying (LER8858EQ2)
« Reply #23 on: December 11, 2009, 06:02:23 PM »
The bias stat has two fat load carrying wires( for element) and 2 small non load carrying wires, the 2 small wires are for the bias heater inside the stat. The timer sends down power and heats up the stat to make it shut down faster for knits and perma press cycles. The bias heater won't show continuity brand new.
« Last Edit: December 11, 2009, 06:04:14 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Agrajag

  • VIP Member
  • Member Since: Mar 2008
  • Posts: 41
Re: Whirlpool Dryer Stopped Drying (LER8858EQ2)
« Reply #24 on: December 11, 2009, 06:28:23 PM »
How do I test the fuse? Assuming continuity. Duh... It's a fuse right? hehehe.

The vent is clean as a whistle.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Whirlpool Dryer Stopped Drying (LER8858EQ2)
« Reply #25 on: December 11, 2009, 06:32:19 PM »
The vent is clean as a whistle.
all the way to where it exits the house ?
« Last Edit: December 11, 2009, 08:56:36 PM by RegUS_PatOff »
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirlpool Dryer Stopped Drying (LER8858EQ2)
« Reply #26 on: December 11, 2009, 07:16:09 PM »
If that fuse blow then that dryer has no life. The wires on the fuse are not load carrying. They are in series with the door switch. When she blows it is like that hatch is open. Nothing more. Clever ain't it?  :rofl:
« Last Edit: December 11, 2009, 07:20:38 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Agrajag

  • VIP Member
  • Member Since: Mar 2008
  • Posts: 41
Re: Whirlpool Dryer Stopped Drying (LER8858EQ2)
« Reply #27 on: December 12, 2009, 08:22:28 AM »
all the way to where it exits the house ?

Yep, I snaked it yesterday. It's a pretty short run.

At this point I'm still not sure what the consensus is as to the problem. Doesn't sound like it's the fuse as I have power, just no heat. The stats are all zeroing (showing continuity). Just not sure about the bias one.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9606
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Whirlpool Dryer Stopped Drying (LER8858EQ2)
« Reply #28 on: December 12, 2009, 08:33:59 AM »
The piece I'm talking about (maybe I need to snap a picture of it) has the heating element ends connected to it.

It would be great if you could post a photo of it, thanks.
Hope you find our website helpful.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Whirlpool Dryer Stopped Drying (LER8858EQ2)
« Reply #29 on: December 12, 2009, 10:47:05 AM »
If it has 4 wires, that's the Bias Thermostat.
Only 2 connections will have continuity.
Have you re-set your house Circuit Breakers ?
It could also be bad/loose connections on the Power Terminal Strip on the back of the Dryer.

It could also be an OPEN Heater Element.
It could be a bad Timer.
After leaving this Earth, "Do you want the smoking or non-smoking section?"

 

Whirlpool Dryer Not Drying

Started by TechnicianBrian

Replies: 0
Views: 1800
Last post April 18, 2008, 08:09:51 PM
by TechnicianBrian
Whirlpool Dryer Not Drying

Started by TechnicianBrian

Replies: 0
Views: 1747
Last post June 02, 2008, 09:56:47 PM
by TechnicianBrian
Whirlpool Dryer LER3624JQ1 -Drying Clothes 2x

Started by LT30

Replies: 3
Views: 3286
Last post January 26, 2011, 08:40:14 AM
by AJ
Whirlpool WGD5200VQ1 gas dryer - poor drying

Started by Frank O

Replies: 4
Views: 300
Last post September 19, 2014, 05:37:22 PM
by dab147315
Video: How to check voltage at cord on a Whirlpool electric dryer.

Started by AJ

Replies: 0
Views: 9484
Last post August 06, 2007, 05:57:19 PM
by AJ
Video: How to take your Whirlpool dryer apart to replace parts & remove lint

Started by AJ

Replies: 0
Views: 21933
Last post August 16, 2007, 06:02:43 PM
by AJ