Forum > Dryer Repair

Whirlpool Dryer Stopped Drying (LER8858EQ2)

<< < (8/8)

Agrajag:
Oh, and Reg, what if the heating element has no continuity? I'm checking it at the point I mentioned before (the two connectors just below the lower thermostat).

Agrajag:
Okay, regarding the timer:

I removed the red wire. Going clockwise around from the read lead there are several other leads. The first two or three all drop to zero. From there on in they do show continuity but don't drop to zero. Now all of this is with the timer in standard Timed mode. The other modes seem to have no impact (no continuity) at all. These are the modes that are "smart" modes that I suspect don't use the timer and thus don't apply here.

Navigation

[0] Message Index

[*] Previous page

Go to full version