Author Topic: Calibrate Dehumidifier humidistat  (Read 2039 times)

Offline CathyJ

  • VIP Member
  • Member Since: Jul 2010
  • Posts: 10
Calibrate Dehumidifier humidistat
« on: February 15, 2011, 04:33:07 PM »
I found a Dehumidifier circuit board and installed it, as mine corroded and deteriorated on the back side.  

It turned on and works great, so long as I leave it running on continuous mode.

But, the run humidity always reads 20%, so the compressor will not turn on unless I run it in Continuous mode.  

Does any one know how to calibrate the humidistat, or where to get a service manual?

Model: FDL70S1


Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: DEHumidifier Manual
« Reply #1 on: February 15, 2011, 09:21:20 PM »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Old But Good Dehumidifier AC Motor Gone Bad. Can I replace? (Pictures)

Started by BPmax

Replies: 6
Views: 1752
Last post May 07, 2012, 07:23:27 AM
by BPmax
my kenmore dehumidifier not removing moisture from the room

Started by viking351

Replies: 9
Views: 3451
Last post June 21, 2010, 07:17:57 PM
by JWWebster
Frigidare Dehumidifier Circuit Board

Started by CathyJ

Replies: 7
Views: 3070
Last post February 02, 2011, 09:44:50 PM
by CathyJ
Kenmore Dehumidifier

Started by ron3033

Replies: 2
Views: 1022
Last post July 09, 2014, 09:30:19 AM
by ron3033