tappan oven no bake or broil

[gregt]

Tapan TEF326FSA stove works but no bake or broil both elements wouldnt go bad at once think it might be the timer control???

[whirlpooltech]

Could be the timer. The way I would check it is to measure voltage at the bake element when the oven is on and trace it back to were you lost voltage.

If you do not have a volt meter it still maybe worth your time to unplug the oven and remove the back panels. Look for burnt wires or connection on the back of the timer and at the back of the element.

[gregt]

Hello now compleatly stumped . I have 120 volts at all 4 element connections and have continuity in both elements   ?

[JWWebster]

120 volts?

[gregt]

110

[jumptrout51]

One leg of power to your bake and broil elements is hot at all times.
That is the 110/120 volts you are reading.
The other leg comes from the electronic control to make up the 220 volts to bake and broil.
Check for power coming to and from the ERC whwn set to bake and broil.
If you have power in and no power out,the ERC is bad.

[JWWebster]

[ryan111]

This seems to be the same board I have been seeing problems with. I have seen 12-15 of these boards (clocks/timers/ERC) bad with the same problem. There is a solder joint that keeps failing. If you determine that timer/clock is the problem you may be able to repair it with a solder gun if you have one. In this clock assembly there are basically two boards connected together in a plastic frame. If you gently prize the top board out and look on the backside of the board you may find a brunt solder joint. If so you can repair the solder joint with a solder gun.

I had someone bring one of these boards in the other day with this same problem I wish I could have gotten pictures but I had left the camera at home that day.