Author Topic: Maytag Neptune Doesn't Spin  (Read 1199 times)

Offline MtgSolver

  • VIP Member
  • Member Since: Feb 2011
  • Posts: 1
Maytag Neptune Doesn't Spin
« on: February 12, 2011, 05:25:02 PM »
This topic has been talked about yet I have an issued that needs clarification.  The unit's door locked light works and the washer cycles all of the way thru all of the cycles until the spin cycle.  I had a technician come out today and he feels it is the motor speed control board.  Yet he didn't actually check the wax motor switch since the door lock lights up and does lock the door properly.  Of course the motor speed board has been discontinued and replaced with a conversion kit along with new motor.  I find it ridiculous to replace more then the board.  Can it be repaired?  There is no burn markings on the board?  THANK YOU IN ADVANCE FOR YOUR ASSISTANCE ON THIS MATTER.

Model MAH4000AWQ

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1475
  • Country: us
    • Buy me a beer through paypal
Re: Maytag Neptune Doesn't Spin
« Reply #1 on: February 13, 2011, 12:46:13 AM »
If the washer will tumble then your motor control is probably okay.  If one of your out-of-balance switches or spin enable switch is open, it won't spin.

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Maytag Neptune Doesn't Spin
« Reply #2 on: February 13, 2011, 08:24:22 AM »
I gotta love your approach...you posted the same link on my forum at the link below:
http://www.repair2000.com/forum/viewtopic.php?t=2809
Did you figger to  get as much feed back as possible? I bet if I Googled your post, it would show up elsewhere :)

Oh well, with this much info available on the Web, no wonder it's hard to sell parts when you window-shop for service help. That's our loss, not yours.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

donate
$1, $2, $5, $10, $20, $50
 

Maytag Neptune MAH4000AWW - No Spin.

Started by larry

Replies: 39
Views: 59086
Last post February 21, 2011, 01:22:14 PM
by bwhelan
Maytag Neptune Washer - No Spin

Started by AJ

Replies: 6
Views: 5647
Last post February 20, 2008, 12:41:13 PM
by AJ
Maytag Neptune Mah4000aww will not go through cycles or spin...

Started by Mudd222

Replies: 11
Views: 4657
Last post April 23, 2013, 11:14:30 AM
by def
Maytag Neptune Very Noisy During Spin

Started by TechnicianBrian

Replies: 0
Views: 3012
Last post April 24, 2008, 10:14:55 PM
by TechnicianBrian
Maytag Neptune Washer - LR on display and no spin

Started by AJ

Replies: 0
Views: 4358
Last post May 05, 2008, 07:00:37 PM
by AJ
Maytag Neptune MAH4000AWW burning smell during spin cycle.

Started by ksujason

Replies: 15
Views: 17301
Last post September 14, 2008, 11:46:31 PM
by Repair-man