Author Topic: Sub Zero 650  (Read 2364 times)

Offline jab4558

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 26
Sub Zero 650
« on: February 11, 2011, 08:01:26 PM »
I need help with m sub zero.  It is showing Vacuum Condenser and only keeps a temp of 64 in the frige.  I vacuumed it and it will go off when i reset it but comes back on.  What else can i do???
Thanks

Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 705
  • Country: us
    • Buy me a beer through paypal
Re: Sub Zero 650
« Reply #1 on: February 11, 2011, 10:25:22 PM »
is there an ice build up on the back wall? left hand side half way up? if you do you most likely have a leak.. and most likely it is in the evapator...how old is it? 1 to 5 parts and labor 6 to 12 parts are under warranty ...
Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!

Offline jab4558

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 26
Re: Sub Zero 650
« Reply #2 on: February 12, 2011, 01:13:43 AM »
no there is no ice and it is 11 years

Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 705
  • Country: us
    • Buy me a beer through paypal
Re: Sub Zero 650
« Reply #3 on: February 14, 2011, 01:12:02 AM »
I would check the evapator by removing the cover.. two screws at the top and check if the compressor is running.... Parts are covered under warranty if it a sealed system call a factory sub zero tech...
Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!