Author Topic: Whirlpool Duet F28 SERIAL COMMUNICATION ERROR  (Read 1704 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9320
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Whirlpool Duet F28 SERIAL COMMUNICATION ERROR
« on: December 13, 2011, 03:08:50 PM »
F28 SERIAL COMMUNICATION ERROR

The communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.

Possible Causes/Procedure

1. Unplug washer or disconnect power.
2. Check wire harness connections to the MCU, the motor, and Central Control Unit (CCU).
Check connections of the CCU board within the housing.
Make sure all grounding switches are engaged.
3. Check the drive system for any worn or failed components.
4. Plug in washer or reconnect power.
5. Verify CCU operation by running a Diagnostic Test or any cycle.
6. Check the MCU by looking for operations of the drive motor.
7. Check the drive motor for powered rotations.
8. Check that the serial harness at the MCU is not mounted upside down. The wires should be to the left when facing the MCU connectors.
Hope you find our site helpful.
Follow us on Google+

 

Whirlpool Duet Sport Error f-01

Started by Ology

Replies: 2
Views: 7131
Last post March 10, 2008, 05:20:36 PM
by Repair-man
Whirlpool Duet Washer - F-30 error code and clunking noise in detergent area.

Started by AJ

Replies: 3
Views: 13076
Last post November 15, 2009, 09:34:58 AM
by AJ
Whirlpool Duet Washer Error Codes

Started by AJ

Replies: 0
Views: 27504
Last post September 13, 2008, 10:38:25 PM
by AJ
Whirlpool Duet Washer F5 Error Code

Started by TechnicianBrian

Replies: 2
Views: 8976
Last post October 05, 2008, 08:39:47 PM
by TechnicianBrian
Whirlpool Duet error message HF?

Started by ccauthon

Replies: 7
Views: 7282
Last post April 22, 2011, 04:46:14 PM
by Repair-man
WHIRLPOOL DUET WASHER ERROR CODES

Started by IPSONDN1

Replies: 3
Views: 8859
Last post December 12, 2008, 12:48:37 PM
by IPSONDN1