Author Topic: Washer does not complete cycle  (Read 3171 times)

Offline dadio354

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 4
Washer does not complete cycle
« on: January 23, 2011, 06:34:35 PM »
1) The washer does not spin / drain completely.

2) When I start the washer cycle - it immidiately agitates as it fills with water. Previously, it would fill and then agitate when full.

3) The cycle seems to be stuck on "Normal" and does not agitate as "Delicate" anymore.

Model WTW57ESVW1

Offline dadio354

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 4
Re: Washer does not complete cycle
« Reply #1 on: January 23, 2011, 07:09:53 PM »
1) The washer does not spin / drain completely.

2) When I start the washer cycle - it immidiately agitates as it fills with water. Previously, it would fill and then agitate when full.

3) The cycle seems to be stuck on "Normal" and does not agitate as "Delicate" anymore.

4) if anybody has a repair/service manual thank you

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Washer does not complete cycle
« Reply #2 on: January 23, 2011, 09:22:08 PM »
wow late late model direct drive.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: Washer does not complete cycle
« Reply #3 on: January 24, 2011, 05:19:17 AM »
Order the load sensing switch,  Formerly known as the pressure switch.  It may be labeled as "fabric softener/no fabric softener" on the control panel

I don't know why they fail.  But they do all the time, I stock 3 different ones on my truck.
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

Offline dadio354

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 4
Re: Washer does not complete cycle
« Reply #4 on: January 24, 2011, 05:55:11 AM »
can it be jumped out? is it needed? Thanks for the help.

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: Washer does not complete cycle
« Reply #5 on: January 24, 2011, 07:14:20 AM »
No it can not be jumped out, and yes you need it.  Change that part
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

Offline dadio354

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 4
Re: Washer does not complete cycle
« Reply #6 on: January 24, 2011, 09:07:52 AM »
Thanks, will let you know what happens

donate
$1, $2, $5, $10, $20, $50
 

Whirlpool Washer Won't Complete Cycle

Started by TechnicianBrian

Replies: 0
Views: 2376
Last post March 26, 2008, 12:26:47 PM
by TechnicianBrian
Samsung front load washer that will not spin to complete cycle

Started by tagarman

Replies: 7
Views: 2685
Last post January 19, 2014, 11:06:14 PM
by VOGUSLAVKY
maytag neptune MAH4000AWW washer wont complete cycle.. help...

Started by stephenlang

Replies: 5
Views: 955
Last post June 17, 2014, 08:53:43 PM
by Wilson13
Maytag washer mah4000aww spin cycle

Started by evo100

Replies: 1
Views: 2711
Last post December 25, 2007, 09:41:02 PM
by AJ
PAV3200AWW Washer is stopping when it get s to rinse cycle

Started by mondoman

Replies: 1
Views: 1992
Last post December 16, 2007, 12:11:43 PM
by apptech
Frigidaire Washer - Noisy During Drain Cycle.

Started by AJ

Replies: 0
Views: 3456
Last post December 27, 2007, 07:54:12 PM
by AJ