looking for replacement washer

[redtail]

I have been looking around, and it was suggested to look at Speed Queen, couple store that carry them don't have them out for display.

Anyway, I notice a lot of washers don't have what I call lint catcher anymore. Is their reason why they did away with this feature?

Still looking, any other thoughts for good one that would replace old Maytag A612?

Thanks

[jumptrout51]

You should repair the 612.

[redtail]

You should repair the 612.

The transmission seem to be the problem, and the cost of replacing it is about as much as new washing machine.

[redtail]

It look like I going to purchase Maytag MVWC200X . Has anyone heard anything bad or good about this washer.

Thanks

[JWWebster]

This gives an idea of how to get into that nice washer.

[Tuco]

It would probably be worth finding a "junk" A612 for parts. Ebay may have a transmission you need.

Dummy me , sold a used 2 belt Maytag , cheap.....for parts money.

[redtail]

It would probably be worth finding a "junk" A612 for parts. Ebay may have a transmission you need.

Dummy me , sold a used 2 belt Maytag , cheap.....for parts money.

I have been looking for few weeks now, but only thing I can find is the whole transmission; which is close buying new washer.

Pretty much I have run out of time, need start washing clothes again. Would love to keep it going.

[Tuco]

The trannies are over $200.   

Have you checked with your junk yard? If you can get into there, I bet you'll find a pile of washers . Grab one up...You might even find a washer that works.

Probably not good marriage advice.

[redtail]

The trannies are over $200.   

Have you checked with your junk yard? If you can get into there, I bet you'll find a pile of washers . Grab one up...You might even find a washer that works.

Probably not good marriage advice.

Good suggestion, but just don't where find the grave yard washers. I have ask around at few appliance repair shops, but they are not really helping to much. Rather they suggest to replace the whole washer.

I know I end-up kicking myself later for getting rid of it.

[tgoods]

The MVWC200X is the new Whirlpool design.  I haven't worked on it or had any training yet.  I heard it's been reliable in the first year with lower than expected warranty calls. Since it's a new design, it's hard to judge it's longevity.

[redtail]

The MVWC200X is the new Whirlpool design.  I haven't worked on it or had any training yet.  I heard it's been reliable in the first year with lower than expected warranty calls. Since it's a new design, it's hard to judge it's longevity.

Well one my family members came Maytag MVWC400VW at appliance store. It similar to the mvwc200x, but as I understand it has transmission unlike the newer models. Also, this model has been discontinue. It worth looking into buying instead of mvwc200x?

anybody know anything about this model by chance?