Author Topic: Will agitate in spin-weak spin?  (Read 1168 times)

Offline brookein_van

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 1
Will agitate in spin-weak spin?
« on: January 26, 2011, 11:49:19 PM »
Hello, my washer is agitating in a spin cycle. While in the spin the agitator turns, as does the spin basket, but it does it weakly-without force. I tried to replace the thrust bearing kit, but couldn't get it to line up properly. When I installed the cam, it was always a bit to the left of the 'markers'. It continued to do the same thing. Is the adjustment on that cam 'that' important or am I dealing with a transmission issue?

Model MAVT446AWW

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: Will agitate in spin-weak spin?
« Reply #1 on: January 27, 2011, 06:25:20 AM »
I'm sorry to inform you, But the transmission on your washer is shot.... I would check and see what the warranty policy states in the owners manual.  Some of theses machines had a 5 or 10 year transmission warranty.
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

donate
$1, $2, $5, $10, $20, $50
 

Repair Guide: Whirlpool Direct Drive Washer - No agitate or spin

Started by AJ

Replies: 13
Views: 26898
Last post January 02, 2009, 01:09:38 PM
by AJ
Whirlpool Washer - No Agitate or Spin

Started by AJ

Replies: 0
Views: 2190
Last post December 27, 2007, 07:58:27 PM
by AJ
whirlpool washer won't agitate or spin

Started by whirlpool problem

Replies: 6
Views: 6709
Last post May 02, 2008, 12:33:26 PM
by AJ
Kenmore Washer will not drain or spin, agitates on the agitate lo cylce only

Started by mattz

Replies: 5
Views: 8770
Last post March 11, 2008, 09:21:43 AM
by mattz
Whirlpool SAWS800HQ0 will AGITATE but won't SPIN

Started by a.beam.reach

Replies: 44
Views: 14931
Last post April 04, 2008, 10:31:25 AM
by JWWebster
Whirlpool Washer no Agitate or Spin

Started by TechnicianBrian

Replies: 0
Views: 1764
Last post April 07, 2008, 09:11:45 PM
by TechnicianBrian