Author Topic: valve-regulator conversion  (Read 1419 times)

Offline brad

  • VIP Member
  • Member Since: Aug 2007
  • Posts: 205
valve-regulator conversion
« on: January 18, 2011, 07:36:59 PM »
I need to replace the oven gas valve regulator.The part that I have is GE WB19K10007. I need to convert this to LP.How do I do this?

Model 362.74621301

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: valve-regulator conversion
« Reply #1 on: January 18, 2011, 08:31:58 PM »
The brass hood on the left inside the red circle you have to screw down all the way, but not to tight. You can always screw it down more if the flame is to big.

The part (nut/cap) under the plastic cover on the right inside the blue square needs to be unscrewed, flipped over and screwed back in place.

Offline brad

  • VIP Member
  • Member Since: Aug 2007
  • Posts: 205
Re: valve-regulator conversion
« Reply #2 on: January 19, 2011, 05:11:42 AM »
Thank you for the good info and help.

 

Need help with opening range top for gas stove to replace burner valve.

Started by bobafett13

Replies: 3
Views: 2578
Last post January 24, 2008, 10:57:06 AM
by JWWebster
oven safty valve with sensor

Started by medhatthabet

Replies: 3
Views: 2196
Last post April 27, 2008, 02:13:04 AM
by RegUS_PatOff
Tappan gas oven safety valve

Started by MajorApp

Replies: 16
Views: 10848
Last post May 24, 2008, 11:02:57 AM
by JWWebster
propane conversion

Started by schaffersapplian

Replies: 5
Views: 1686
Last post November 26, 2008, 01:17:53 PM
by schaffersapplian
Kenmore gas valve problem

Started by baxtr

Replies: 5
Views: 2106
Last post December 14, 2008, 11:32:45 AM
by baxtr
WB21T10001 GE Gas Range Oven Control Valve

Started by AJ

Replies: 0
Views: 2044
Last post April 14, 2009, 05:34:25 AM
by AJ