Author Topic: GE Profile Dead Micro-wave  (Read 1782 times)

Offline RB98

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 1
GE Profile Dead Micro-wave
« on: January 18, 2011, 10:04:29 AM »
Unit has gone dead , all house breakers are working. Does this unit have its own breaker?

Model JEM31SF001


Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Dead Micro-wave
« Reply #1 on: January 18, 2011, 02:04:18 PM »
I have never worked on this particular model, but all microwaves have a fuse inside that is on the hot side (black wire) were the power enters the microwave.

Most often a microwave fuse will blow just because it gets week other times it will blow because of a bad door switch.


Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9607
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Dead Micro-wave
« Reply #2 on: January 18, 2011, 02:23:07 PM »
This Diagram for your microwave may help you locate the fuse. I see it listed as part #1 in the diagram.

Looks like it maybe incased in a white plastic tube that will snap apart to expose the fuse inside it.

If you follow the black power wire going into the microwave you should be able to find it.
Hope you find our website helpful.

 

Microwave Maytag Dead

Started by lpayne1234

Replies: 5
Views: 3915
Last post May 12, 2008, 09:11:51 PM
by whirlpooltech
Whirlpool Wall oven/Micro

Started by service1

Replies: 4
Views: 4994
Last post September 24, 2008, 07:53:12 AM
by whirlpooltech
GE Profile Microwave Problem

Started by NormanB

Replies: 1
Views: 1766
Last post November 26, 2008, 12:59:53 PM
by JWWebster
Microwave Oven appears dead

Started by lishmah

Replies: 8
Views: 3734
Last post December 09, 2008, 03:13:44 PM
by lishmah
Fridgidere Free Standing Gas Range with five burners & 2 ovens dead after storm

Started by kidsteele

Replies: 15
Views: 5205
Last post March 19, 2009, 04:00:33 PM
by Icehouse
GE Profile Oven

Started by jab4558

Replies: 3
Views: 1784
Last post July 24, 2009, 06:01:22 AM
by Repair-man