Author Topic: mah2400aww door leak  (Read 7330 times)

Offline odin

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 17
Re: mah2400aww door leak
« Reply #10 on: January 19, 2011, 05:56:36 PM »

Feh.  I just noticed some dark specks on the floor in front of my washer.  Took a closer look and it's rusted metal.  Poked around my washer and realized water must be leaking out the door of my front loading washer and seeping down under the lip of the rubber seal and rusting out the lip of the door opening which the rubber seal is spring-clipped to.  I checked the rubber seal and it appears supple and intact, no splits, tears, cracking, etc. so I suspect a slow leak.  Looking at the design of this door, it's clearly not water-tight, nor intended to be since it lacks the leverage by nature of its door/hinge design, yet the washer is designed for the water level to be higher than the level of the door.
 
I hate Maytag washers.  I'm never buying another one.  Once this one fully rusts out, it's anything but Maytag.

 

Small leak form door

Started by rudyjr

Replies: 6
Views: 3738
Last post September 25, 2008, 07:34:08 PM
by Timatae
Maytag Neptune Front Load Door Leak

Started by MajorApp

Replies: 0
Views: 2783
Last post June 01, 2009, 09:47:23 PM
by MajorApp
leak out the door

Started by donsabol

Replies: 0
Views: 633
Last post October 28, 2013, 04:19:33 PM
by donsabol
Maytag LAT8704AAE Washer Leak

Started by endresrk

Replies: 3
Views: 5853
Last post August 28, 2007, 08:11:12 PM
by AJ
Maytag MAH3000AWW Door Boot Seal

Started by georgiabowles@msn.com

Replies: 15
Views: 12242
Last post October 16, 2012, 07:51:53 PM
by bigbuck
oil leak from under ge profile washer

Started by husker

Replies: 1
Views: 4551
Last post October 14, 2007, 05:42:08 PM
by Pegi