Author Topic: Kenmore 80 series Fills with water but nothing else happens!  (Read 3000 times)

Offline spawnly19

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 1
Washer fills and fills and fills with water but never goes to next setting. When I turn it to the next setting.....nothing happens!

Model 11025862400

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Kenmore 80 series Fills with water but nothing else happens!
« Reply #1 on: January 12, 2011, 07:18:15 PM »
Once your water level switch is satisfied by the set water level,the machine should start agitation.
If the water stops filling and does not agitate,either the lid switch is bad or the timer is bad or the motor is bad.
If the water continues to fill and overflows either the water level switch is bad or the water valve is bad.
Take a Kid fishing.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore 80 series Fills with water but nothing else happens!
« Reply #2 on: January 12, 2011, 07:48:00 PM »
Your drain hose needs to be at least 30 inches above the floor
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Kenmore 80 series Fills with water but nothing else happens!
« Reply #3 on: January 15, 2011, 09:25:23 AM »
Lid Switch
After leaving this Earth, "Do you want the smoking or non-smoking section?"

 

Kenmore 90 Series washer: Cold water does not fill wash, but fills rinse

Started by purnell1

Replies: 4
Views: 524
Last post December 02, 2013, 07:52:49 AM
by purnell1
Kenmore Washer 400 series MDL: 28432700 Fills with water then nothing

Started by abranch

Replies: 8
Views: 665
Last post December 04, 2013, 03:32:27 PM
by dab147315
Kenmore series 90 won't agitate; buzzing sound; fills, spins, and drains fine

Started by kevink

Replies: 15
Views: 5804
Last post December 09, 2008, 11:15:37 AM
by kevink
kenmore washer 90 series won't fill water

Started by ryanbach

Replies: 9
Views: 6259
Last post August 20, 2009, 07:59:30 PM
by Washaman
Kenmore Series 80 Won't Fill With Water

Started by dburrell

Replies: 1
Views: 2269
Last post September 07, 2009, 11:08:12 PM
by JWWebster
Kenmore 70 Series Washer - no cold water, weak spin cycle?

Started by Q451990

Replies: 10
Views: 4277
Last post January 28, 2010, 08:31:18 PM
by viking351