Author Topic: cycle stops at spin  (Read 4972 times)

Offline frank2

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 10
Re: cycle stops at spin
« Reply #15 on: January 15, 2011, 08:51:37 AM »
Top of machine is bare.
Only sticker I can find is on the edge of the dryer door.
Model # and Serial # . Made in USA. Looks like some time in June, 1995.
Only other sticker is Energy Label on lower front panel of washer. 

Offline frank2

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 10
Re: cycle stops at spin
« Reply #16 on: January 15, 2011, 02:25:27 PM »
Happy Days!
I took the lid lock out of the loop and jumped the wires.
The full cycle went through including spins.
Put the lid lock back in and no joy again. However, when I manually pressed down on the lid switch through the cycle all was well.

So after all that, my problem seemed to be:
1. Loose belt caused by tension not being set strong enough.
2. The lid switch not being depressed far enough to close the circuit 
    completely.

Thank you to jumptrout51 for taking the time.   

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: cycle stops at spin
« Reply #17 on: January 15, 2011, 07:15:48 PM »
You are welcome.
Perseverance pays off.
Coors Light.
Take a Kid fishing.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: cycle stops at spin
« Reply #18 on: January 15, 2011, 08:51:21 PM »
FLC271 c. 1993
can only find Owners Guide
looks like it may be a W/P Thin Twin
« Last Edit: January 15, 2011, 08:57:34 PM by RegUS_PatOff »
After leaving this Earth, "Do you want the smoking or non-smoking section?"

 

Stops at Spin Cycle

Started by djp

Replies: 4
Views: 1592
Last post March 05, 2009, 07:01:36 AM
by djp
Stops at Spin Cycle

Started by dkhesser

Replies: 10
Views: 2824
Last post March 10, 2009, 04:59:40 PM
by JWWebster
GE washer stops mid cycle & wont spin out completely

Started by kstump27

Replies: 2
Views: 8037
Last post July 07, 2009, 06:23:24 AM
by Repair-man
stops at last spin cycle

Started by 4uzindian

Replies: 3
Views: 1739
Last post December 21, 2009, 06:36:27 AM
by Repair-man
GE Washer stops right before spin cycle is supposed to start

Started by oldguard

Replies: 5
Views: 4053
Last post May 23, 2011, 09:43:55 AM
by JWWebster
Kenmore washer stops at spin cycle 110.44836300

Started by browniiiz

Replies: 5
Views: 1695
Last post May 03, 2012, 08:13:35 PM
by jumptrout51