No power to a maytag dishwasher

[darmil]

Hi I have no power to the dishwasher at all worked fine this morning went to start it up tonight no power at all.I tested main power with a voltmeter getting above 120v not sure where else to check to see if dishwasher is getting power.Thinking it might be the control board any help would be appreciated.

Model mdb7100aww

[jumptrout51]

When you check incoming power it must be checked at the terminal box under the front lower corner of the dishwasher.
If all is good there then you check the door switch for power and continuity.
The door switch is located inside the control panel at the door latch.
The door latch when closed has to make contact with the door switch for power to go to the timer.

[darmil]

What should it be reading at the terminal box 120v?I will check door switch whats the read for there the same 120v?

[jumptrout51]

120 at the terminal box white to black wires.
120 at the switch wires to a ground.
Check incoming power to the switch,then depress the switch button and check outgoing power.