I have a LDF8812ST
. I think that the motor is bad.
All volts taken in test mode
I have +12 VDC coming to the motor from the red and black wires. +9.9 VDC from Black to Gray and +9.9 VDC Black to Purple.
Black to Light Blue .64 VDC
Black to Dark Blue .95 VDC
Black to White 1.4 VDC
Also the motor shows an open (Infinite resistance or OL) through all pins and to ground. The motor has rusty looking stuff and a faint burnt smell coming from the bottom of the motor in one of the vents where you can see the motor windings.
The motor says 340VDC. Are these Motors in fact DC?
Is the voltage reading that I have provided in the correct range to say that it is the motor?
Is the rusty stuff normal or an indication of Motor failure?