Author Topic: Washer stops advancing  (Read 1157 times)

Offline rrittenhouse

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 1
Washer stops advancing
« on: January 02, 2011, 01:59:02 PM »
I have a Frigidaire Electrolux FWS833AS2 washer that i've noticed has been running having an unknown issue.

I've tried to monitor it and see how its messing up but its weird. I set it for a cycle and it will randomly get stuck on a cycle when its trying to rinse. I'm not sure if its a bad timer or maybe its not holding its water and thats why it can't advance is because the water drains out instead of staying in the washer to activate the next cycle.

Thoughts?

Thanks a bunch :)

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Washer stops advancing
« Reply #1 on: January 02, 2011, 02:50:11 PM »
This machine will not wash or rinse with a bad lid switch,therefore,we rule out the lid switch.
Unless you have water siphoning out the drain hose,the problem lies with an intermittent timer operation.
Could be a loose connection in the wire harness.
My thoughts are a weak timer motor or bad timer gears.
Take a Kid fishing.

 

Maytag Washer timer reaches rinse and stops advancing

Started by nisebug

Replies: 7
Views: 9456
Last post November 13, 2008, 11:48:51 AM
by Repair-man
whirlpool washer stops after it agitates.....

Started by spaceannie54

Replies: 6
Views: 2196
Last post July 13, 2008, 09:00:38 PM
by whirlpooltech
Maytag Atlantis Washer, fills starts stops

Started by crazeddad

Replies: 10
Views: 4976
Last post August 17, 2008, 09:57:54 AM
by Repair-man
Frigidaire Top Load Washer Timer Stops At Same Spot Every Time

Started by grace1717

Replies: 31
Views: 6157
Last post May 04, 2013, 02:45:01 PM
by abzaatari
Performa washer fills, stops, rests and then runs.

Started by Bill60118

Replies: 15
Views: 5885
Last post December 10, 2008, 08:44:53 AM
by Repair-man
Roper Washer Stops during the Wash Cycle.

Started by TechnicianBrian

Replies: 1
Views: 2542
Last post May 28, 2013, 03:37:08 AM
by Rick32k