Author Topic: Whirlpool wont fill  (Read 4971 times)

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Whirlpool wont fill
« Reply #15 on: December 21, 2010, 11:46:47 AM »
Have you tried to follow the wires back from the water valve to the control board and then measure for power off of the control board?

Are you sure the wires got plugged into the new board correctly when you installed the new board?

Offline Adammac

  • VIP Member
  • Member Since: Dec 2010
  • Posts: 9
Re: Whirlpool wont fill
« Reply #16 on: December 21, 2010, 12:00:23 PM »
I labeled them to be sure they were reconnected the correct way. I'll check the voltage at the board next but I was having the same issue before changing out the board.

Offline Adammac

  • VIP Member
  • Member Since: Dec 2010
  • Posts: 9
Re: Whirlpool wont fill
« Reply #17 on: January 21, 2011, 07:08:07 PM »
Sorry it's taken so long to reply. Just want to let everybody know that the problem was the timer. Thank you everyone for all your help! This is still the best place to go for answers and help.

Regards,

Adam

 

whirlpool WTW57ESVW0 Wont fill. spins on soak..

Started by schleven

Replies: 7
Views: 525
Last post April 03, 2014, 09:25:55 AM
by dab147315
whirlpool ultimate care II leaking water from bottom front and wont spin

Started by vasdoc

Replies: 6
Views: 7283
Last post October 12, 2008, 09:20:49 PM
by JWWebster
Whirlpool Roper Washer Wont Spin

Started by psubill

Replies: 1
Views: 2715
Last post November 12, 2008, 10:47:11 AM
by JWWebster
whirlpool washer will agitate wont spin

Started by whit

Replies: 1
Views: 2673
Last post November 15, 2008, 03:07:35 PM
by JWWebster
water wont fill

Started by markmezzano

Replies: 1
Views: 1419
Last post January 12, 2009, 05:25:06 AM
by Repair-man
whirlpool wont spin

Started by peihome

Replies: 6
Views: 2822
Last post January 14, 2009, 07:29:20 AM
by peihome