Whirlpool front loader still leaking

[paulpassat]

Hello, I replaced the bellow and the washing machine still leaks. It seems like the door is not making a good seal with the bellow. it is leaking from the bottom of the door. it leaks when the washer is filling up with water. thanks

Model GHW9100LW2

[AJ]

Please post the model number of your washer.

Did you try cleaning the glass around the bottom of the door were it makes contact with the bellows?

[paulpassat]

Thanks for getting back to me. I will try that. the model number is GHW9100LW2

[Repair-man]

Replace the hinges on the door.

[paulpassat]

Is this a common problem with this washer. The door does seem to have a bit of play.

[paulpassat]

AP3128729 is this the part number

[whirlpooltech]

I have had to change a few door hinges myself to correct problems with the door leaking.

That is the correct part number.

[paulpassat]

ok replaced door hinge and bellow. The door is still leaking. What next. Thanks

[niobrara]

Put a couple of washers behind the door latch.Also you can put a little food grade silicon on the bottom of the new bellow.The unit is not filling to full?