Frigidaire Dishwasher Leaking from the Door

[meindl]

I think this is what is wrong with my Frigidaire FDB1502RGQ0 dishwasher.  I went on Appliancepartspros.com to find the right bottom seal and I can't find it.  I can find the exact replacement (without the gaskets on the sides) but I can't find the one with the gaskets on the sides.

I've went back and forth with Sandra from Customer Service and she has given up giving me the part number.  Her and her supervisor can't figure it out.

So I'm hoping you can tell me the part number to order so that I get the bottom seal with the sealing pieces added to the side.

Thanks!

[AJ]

Meindl,

Is your model number also PLD2855RFC1 or do you have a different model?

[AJ]

There is a link to the part in the original post.

[meindl]

I have model number FDB1502RGQ0. 

The link in the original post goes to the bottom door seal without the added sealing pieces on the sides.

[AJ]

I have split your reply into it's own topic and referenced the original topic you posted a reply to. I also included your model number in the header of this topic.

Just heading out the door, but will research this later if another technician has not already post a answer for you by then.

[meindl]

Thanks!

[AJ]

I looked up your model number and found that the factory part number for the door gasket you are looking for is, part # 154576501.

Then I started looking at the photos online at both our affiliates sites.

Frigidaire Dishwasher Bottom Door Seal 154576501


154576501 @ RepairClinic

I believe they both show images of the original part before the changes were made. I would guess there old stock has been replaced by the updated part by now.

The only way to know for sure maybe to order the part yourself. It is not a very expensive part and if it's not what you expect you can simply return it.

I have never run into this type of problem myself yet, sorry.

Maybe another tech can chime in with there experience with replacing this type of Frigidaire dishwasher door gasket.

If you do decide to order the part please keep us updated as to what type of door seal they send you.

[BrntToast]

you wont find the door baffle with the lil wings on the ends, its no longer used
replace the baffle with the one you posted earlier, if the machine still leaks from the corners you must install the splash shield service kit, part # 154701001

[BrntToast]

if you remove the front panel (2 screws closest to the bottom on the inner door liner, then it slides down and comes off) you will be able to watch the water in the bottom of the tub and see where the leak comes from

[jumptrout51]

BrnToast is correct.