Whirlpool Duet Sport Dryer Error f-01

[r_unda]

I am getting the code (f-01) on my dryer Model WED8410SW1

Is this the right replacement part for it?
http://www.repairclinic.com/SSPartDetail.aspx?s=t-WED8410SW1-%3d%3di1203139&PartID=1203139

Is control board same as CCU?

Thank you!

[r_unda]

Bump. Anyone? I have being going to the laundry mat all this time. I want to tackle this during the break if possible.

Thanks!

[whirlpooltech]

Is control board same as CCU?

Yes, I looked up your model number and the factory part number for the control board is W10111606

The link you posted is the correct part too, but it's a little cheaper here.

http://www.appliancepartspros.com/Appliance-Parts/whirlpool-electronic-control-item-number-ap3965135.aspx?pn_=W10111606

I have replaced these boards in the past to repair the F-01 problem.

[r_unda]

Thank you!

[whirlpooltech]

Please keep us updated as to how the repair goes for you.

[r_unda]

Well it did not work. Finally installed new part today and it is still giving me the f-01. What else can it be?

[MajorApp]

  What is your dryer not doing? Have you tested the thermal fuse and thermistor. Sometimes these things will throw out a false error code.

[JWWebster]

Service manual:
https://docs.google.com/leaf?id=0B5If-wTgYWH5MDQ4MjcxMTEtZGI3Yy00MzRlLTlmMTMtZmVlMWMwZGU5MGI4&hl=en

[r_unda]

  What is your dryer not doing? Have you tested the thermal fuse and thermistor. Sometimes these things will throw out a false error code.

When I press and hold the start button it goes through the “sensing” cycle once it gets to “wet” something inside makes a clicking sound and it gives me the F-01 code.
I replaced the thermal fuse before and that fixed another problem that I was having. Dryer worked fine for a while until I got the F-01 code.

[r_unda]

Anyone? Thanks!

[bigbuck]

is your code a f-1 or e-1., f-01 is a control board failure problem

[r_unda]

is your code a f-1 or e-1., f-01 is a control board failure problem

F-01 ... I already replaced the control board