Author Topic: Whirlpool Refrigerator Condesner Motor  (Read 3648 times)

Offline mdfudge

  • VIP Member
  • Member Since: Mar 2010
  • Posts: 10
Whirlpool Refrigerator Condesner Motor
« on: October 27, 2010, 01:35:46 PM »
Hi Guys,

I have a Kenmore Refrigerator Side-by-Side Model# 10653606202

A year ago I replace a burned out condenser fan motor part # W10181323

It seems to stop working for some reason, to the fact that I have to push the fan with a dowl or stick to get it running.. it seems

to run fine but every now and then it will get stuck or not startup by itself and I will have to push the fan blade to get it back

running. Its fairly clean where the fan is at, and there is no lint or spiders causing it to stop spinning.

It also doesn't feel like its binding and turns very easy.  I also noticed that this motor is a very low current draw type to save energy.

115V-600Hz  48mA

Has anyone ever had a problem like this?  Maybe its just a bad new motor.

should I just replace it again?   Thnks for your time and interest

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirlpool Refrigerator Condesner Motor
« Reply #1 on: October 27, 2010, 03:07:22 PM »
Give it a shot of zoomoil.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline mdfudge

  • VIP Member
  • Member Since: Mar 2010
  • Posts: 10
Re: Whirlpool Refrigerator Condesner Motor
« Reply #2 on: October 27, 2010, 04:00:44 PM »
Hi JWWebster,

Ok I will try some of that oil.. its good for just about anything.. I love that fill tube it also comes with and its

priced at a very reasonable price too.  Seems like a very light oil.

-BTW JWWebster - My dishwasher water inlet valve is working great so far.. no leaks.. and the other added parts make it

a nice refurbished dishwasher.. so nice to keep this machines running.. afterall, they need it from time to time! "they do work for us, right!"

Peace

Offline rmbraught

  • Technician
  • Member Since: Oct 2009
  • Posts: 47
  • Country: us
Re: Whirlpool Refrigerator Condesner Motor
« Reply #3 on: October 28, 2010, 06:12:10 PM »
Low starting torque, and the intent to be 'green' (low energy usage during operation.) Quieter than the older classic open frame motors... I'm not second guessing their empirical choice, but...

(did I say convert to an All Metal Manly Motor? ;)

Seriously, when WPL initially spec approved (for use in production) the Panasonic motors in their units I don't believe they had been appreciably field tested for abusive environments (like the rear of a typical refrigerator, heat/dust etc); plus, when you add any shaft mass (fan blade) the low starting torque becomes an issue for reliability. IMHO a plastic blade does better than a metal one (lower mass); however, we've had to replace motors with either style blade.

 

Repair Guide: Whirlpool Refrigerator - Water in bottom of fridge under drawers.

Started by AJ

Replies: 3
Views: 80685
Last post July 08, 2007, 12:04:06 PM
by curtis
Video: How to clear a Whirlpool made Refrigerator Defrost Drain Tube.

Started by AJ

Replies: 2
Views: 16963
Last post August 11, 2007, 09:38:43 AM
by AJ
Please help, Whirlpool refrigerator not cooling good.

Started by paul

Replies: 6
Views: 4876
Last post August 22, 2007, 12:59:04 PM
by Pegi
Whirlpool refrigerator Nbr: GS6SHAXML00 Icemaker doesn't work.

Started by tech718

Replies: 6
Views: 7323
Last post October 02, 2007, 06:46:44 AM
by AJ
Whirlpool Refrigerator Not Cooling

Started by TechnicianBrian

Replies: 0
Views: 2359
Last post May 05, 2008, 10:33:31 PM
by TechnicianBrian
Whirlpool Refrigerator - Not running, replaced defrost timer.

Started by AJ

Replies: 0
Views: 8200
Last post May 09, 2008, 01:05:15 PM
by AJ