Author Topic: Maytag Refrigerator HELP..old tech in need of info ref .board/display gone nuts  (Read 6766 times)

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: HELP..old tech in need of info ref .board/display gone nuts
« Reply #10 on: October 28, 2010, 01:01:07 PM »
Open the fresh food door and hold the fresh food door light switch closed while pushing the freezer temperature down button pad 3 times within 10 seconds.

Release the FF door light switch.
The control will display PE.
When you see PE press the freezer down button one more time.

To set the code press the freezer up key to the code number.
Then press the refrigerator up key for the nex5t code digit.
Once the code is entered press the freezer down key until the code flashes.
When it flashes the code is saved.
It will take a couple minutes for the compressor to come on after the code is set.
« Last Edit: October 28, 2010, 01:04:37 PM by jumptrout51 »
Take a Kid fishing.

Offline williesanchez69

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 38
  • 2 Tim 1;7
Re: HELP..old tech in need of info ref .board/display gone nuts
« Reply #11 on: October 28, 2010, 04:33:16 PM »
Thank you jumptrout.I WILL TRY THAT FRIDAY MORNING.I THANK JESUSCHRIST FOR ALL THE HELP.I MUCH APPRECIATE THE SITE :) O0
2 Tim 1;7 God has not given us a spirit of cowerdness but of power,love and a sound mind The problem of the world is not its economy.but the real problem is SIN

Offline williesanchez69

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 38
  • 2 Tim 1;7
Re: HELP..old tech in need of info ref .board/display gone nuts
« Reply #12 on: October 30, 2010, 05:17:07 AM »
Hello well I've done tried to program this ref as advised but the ref is not responding to it.I pressed the FF switch hit/touched the minus area on the freezer 3 times in10seconds still PEO OOO is present never did PE apper I did follow the steps in order jumptrout I would appreciate some futher advice.and would ther be a tech manuel onthis ref inthe manul section of the web site I am determined to work this problem out..alaluya!!!:)
2 Tim 1;7 God has not given us a spirit of cowerdness but of power,love and a sound mind The problem of the world is not its economy.but the real problem is SIN

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: HELP..old tech in need of info ref .board/display gone nuts
« Reply #13 on: October 30, 2010, 06:08:27 AM »
Mr. Sanchez;

The new control came with good instructions as to how to do this. However, some folks need a visual aid instead of writing to see how things like this are done. The following video explains how to program the Maytag Jazz board:

Jazz Board service
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline williesanchez69

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 38
  • 2 Tim 1;7
Re: HELP..old tech in need of info ref .board/display gone nuts
« Reply #14 on: October 30, 2010, 08:06:00 AM »
Thank you.well the new board I got came with no instructions I need to call my parts store thank you
2 Tim 1;7 God has not given us a spirit of cowerdness but of power,love and a sound mind The problem of the world is not its economy.but the real problem is SIN

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 556
  • Country: us
Re: HELP..old tech in need of info ref .board/display gone nuts
« Reply #15 on: October 30, 2010, 12:27:01 PM »
The instructions to program the board should be on the tech sheet thats with the refrigerator. Check the compressor compartment behind the refrigerator.

Offline williesanchez69

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 38
  • 2 Tim 1;7
Re: HELP..old tech in need of info ref .board/display gone nuts
« Reply #16 on: October 30, 2010, 02:55:25 PM »
Yes sir they should be ther on the back but some ones taken them thanks to all your all great!!!!
2 Tim 1;7 God has not given us a spirit of cowerdness but of power,love and a sound mind The problem of the world is not its economy.but the real problem is SIN

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: HELP..old tech in need of info ref .board/display gone nuts
« Reply #17 on: October 30, 2010, 03:14:27 PM »
I have a jazz board in my truck, im sure the instructions are in there, ill upload it.
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9607
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: HELP..old tech in need of info ref .board/display gone nuts
« Reply #18 on: October 30, 2010, 03:18:23 PM »
I have a jazz board in my truck, im sure the instructions are in there, ill upload it.

That would be great!  O0

I have also attached the tech sheet at the bottom of this post.

Hope you find our website helpful.

Offline williesanchez69

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 38
  • 2 Tim 1;7
Re: HELP..old tech in need of info ref .board/display gone nuts
« Reply #19 on: October 30, 2010, 09:01:25 PM »
 Thank you all I also searched the manuels.but not all that familier.I thank you ALL O0
2 Tim 1;7 God has not given us a spirit of cowerdness but of power,love and a sound mind The problem of the world is not its economy.but the real problem is SIN

 

61005988 Maytag Refrigerator Adaptive Defrost Control Board

Started by AJ

Replies: 4
Views: 10577
Last post February 19, 2011, 07:44:34 PM
by RegUS_PatOff
W10165748 Maytag Amana Refrigerator Control Board Kit

Started by AJ

Replies: 0
Views: 5311
Last post May 31, 2009, 11:43:16 AM
by AJ
Maytag Refrigerator Not Cooling, Replaced Deforst Control Board

Started by Ol' Lonely

Replies: 0
Views: 1558
Last post March 26, 2012, 10:19:52 AM
by Ol' Lonely
Where is the ADC board located on a Maytag french door refrigerator?

Started by kenebob

Replies: 8
Views: 2561
Last post August 29, 2012, 03:29:12 AM
by haroldsappliance
Tech Sheet for Maytag Ref. MSD2650HEB? re: adc board

Started by andersenappliance

Replies: 16
Views: 2987
Last post September 24, 2012, 06:49:14 PM
by JWWebster
Maytag Jazz Board in Refrigerator model MBR2262KES

Started by Karin Yehlik Crawford

Replies: 1
Views: 953
Last post August 14, 2013, 08:41:19 PM
by tgoods